Flatbed truck hire for machines, steel and pallets
Describe the load, where it goes and how it is loaded and offloaded. Headcore puts your request in front of companies that run flatbed trucks and serve your area, and each decides whether to respond.
Free to post. Nothing reaches suppliers until you review and post it.
- Reaches matching companies within minutes
- Anonymous to suppliers until you choose to reveal
- You choose who to talk to
What details help?
All optional. Mention what you know.
- What must be moved. The machine or load, roughly how heavy, and its length, width and height if you know.
- From where to where. Where it stands now, where it must go, and roughly how far apart the two are.
- Loading and offloading. Whether it can drive on and off, or needs a forklift or crane at either end.
- Where and when. The town, access to the site, and when the work can be done.
See an example request
Illustrative, not a real request.
We need a flatbed truck to move six steel beams and a pallet of fittings from a yard to our building site.
- Each beam about 9 metres long and 1.1 tons, loaded by forklift
- From Germiston, Gauteng to a site in Polokwane, Limpopo
How Headcore helps with flatbed truck hire
Keep your usual transporter in the mix. Headcore helps you find additional companies that can do this work.
- 01
Describe the load and the route
Start in your own words: what must be moved, roughly how heavy and how long, and from where to where. You review the request before anything is posted.
- 02
Reach flatbed truck companies
Companies that run flatbed trucks and serve your area see the request. Each decides for itself whether to respond.
- 03
Choose who to speak with
Compare how they would approach it, reveal your company only to the ones you choose, and deal with them directly.
Before you hire a flatbed truck
The load: size, mass and shape
Give the length, width and height of the biggest piece and the total mass. These decide the deck length, the truck class and whether the load stays within the legal width and height.
Loading and offloading
Say what loads the truck at the start and what offloads it at the end: a forklift, a crane, a crane on the truck, or people by hand.
Covering and tying down
Say whether the load needs a tarp, and what sort of tying down it needs. A load that is bagged, loose or sensitive to rain is a different job to steel.
Route and access
The towns, the road at the site and the way in for a long vehicle. Say whether there is room to turn or reverse a truck and trailer.
In short
A flatbed truck, also called a flat deck truck, carries a load on an open deck: either a rigid truck or a flatdeck semi-trailer. Choose it by deck length and by the GVM with the body fitted, not by a ton label. By law the load must be safely contained or securely fastened, and a vehicle with its load may not exceed 4.3 m in height.
What is a flatbed truck, and how does it differ from a dropside or a tautliner?
A flatbed or flat deck truck carries its load on an open deck. One trade guide lists a light truck that is available with a dropside, flatdeck or van body, so ask which body is on the vehicle you are offered.[1]
A tautliner is a different vehicle: a trailer with a curtain-like sidewall system that gives access to the load from both sides and can be closed and sealed. If your load must be covered and kept closed in transit, say so in the request.[2]
How long and how heavy is a flatbed truck?
Labels such as 4 ton, 8 ton or 14 ton are trade names: the guide used here calls trucks of 7,200 kg and 7,500 kg GVM 4 ton trucks and gives no payload for any of them. So ask each response for the GVM, the tare and the payload with the body fitted. The rows below are what the sources state.[1][3][4][5][6]
| Configuration | Figures | What it tells you |
|---|---|---|
| Light rigid truck with a dropside, flatdeck or van body | Three light models are listed at a GVM of 7,500 kg, 7,500 kg and 7,200 kg, with overall vehicle lengths of 4.8 m, 5.2 m and 6.52 m. | These are the length of the whole vehicle, not the deck, and the guide gives no payload. It says one of the models is available with a dropside, flatdeck and van body. |
| Flatdeck semi-trailer | One body builder lists a 12.2 m tandem semi and a 13.5 m triaxle semi, and interlink, extendable and PBS link flatdeck options. | A semi-trailer needs a truck tractor to pull it. The page gives no length for the interlink, extendable or PBS link versions. |
| Flatdeck drawbar trailer | The same builder lists drawbar options of 6.2 m single, 10.3 m tandem and 12.2 m tandem tandem. | A drawbar trailer goes behind a rigid truck, so the pair is a combination for the length limit below. |
| Legal ceiling on length | Regulation 221 allows 12.5 m, drawbar or coupling included, for a single vehicle other than a semi-trailer; 18.5 m for an articulated vehicle or another drawing vehicle with a semi-trailer; and 22 m for any other combination, such as a rigid truck with a drawbar trailer. | Ask for the overall length, drawbar included, of the truck or combination offered. |
| Legal ceiling on width and height | Regulations 223 and 224: a goods vehicle of 12,000 kg GVM or more may be 2.6 m wide, others 2.5 m. The height limit, with any load, is 4.3 m for a motor vehicle other than a double-deck bus. | The limits apply to the vehicle with its load on it. If your load is close to the width or the height, say so in the request. |
How must a load on a flatbed be secured, and how far may it stick out?
Regulation 246 of the National Road Traffic Regulations, 2000 bars operating a motor vehicle carrying goods on a public road if the goods touch the road surface (a static chain excepted), block the driver's view ahead, to the side or in the mirrors, or are not safely contained in the body or securely fastened to it and protected from being dislodged or spilled. A container fitted for twist locks must be secured by at least four, or two if it is at least 1.5 m and under 3 m long.[9]
Regulation 227 limits a projecting load. On a vehicle other than a motor cycle, it may not project more than 300 mm beyond the front end or more than 1,800 mm beyond the rear end, and the side limit is 1,300 mm either side of the centre-line for a goods vehicle in the 2.6 m width class and 1,250 mm for other vehicles. A bracket may not project more than 150 mm beyond the widest part of the vehicle. The vehicle or combination and any projection together may not exceed the overall length that regulation 221 sets for it.[7]
Regulation 229 requires warnings for a projecting load. A load that goes more than 150 mm beyond the side needs, by day, red cloth flags of at least 300 mm by 300 mm at the front and rear of the projection, and at night or in poor visibility a white reflector or lamp at its front edge and a red one at its rear edge. A load that goes more than 300 mm beyond the rear needs, by day, red flags of at least 300 mm by 300 mm at its end (one is enough if the projection is less than 600 mm wide), and at night or in poor visibility red reflectors or lamps on its end and yellow ones on both sides of the end.[8]
- The driver's licence follows the truck's gross vehicle mass: code C1 for a goods vehicle above 3,500 kg up to 16,000 kg and code C above 16,000 kg, with no trailer above 750 kg. A truck-tractor with a semi-trailer, or a truck pulling a trailer above 750 kg, needs code EC1 or EC (GN R. 846 of 2014).[10]
- The driver of a goods vehicle with a GVM above 3,500 kg must also hold a professional driving permit, with listed exceptions (regulation 115).[11]
What should a flatbed truck request include?
Usually a flatbed is chosen by the longest piece and the total mass, and then checked against how the load goes on and off. Flatbed truck responses compare well when the request gives these details:
- The load: what it is, the length, width and height of the biggest piece, its mass and the total mass, and how many pieces.
- Loading at the start: a forklift, a crane, a crane on the truck or hands, and whether the supplier must bring it.
- Offloading at the end: the same question, plus the room to reverse or turn a long vehicle and a firm place for it to stand.
- Covering and tying down: a tarp, straps, chains or corner protectors, and who supplies them.
- The route: where it loads, where it goes, any narrow or low roads on the way, and whether a return load is possible.
- Dates and times: when it can load, when it must arrive and any waiting time at either end.
- Whether the hire includes a driver, and who covers the load in transit.
Sources
- Truck & Trailer South Africa, 4 ton trucks: everything you need for your business, 9 June 2022.
- Truck & Trailer South Africa, Understanding tautliner trailer design and functionality, 8 January 2024.
- SA Truck Bodies, Flatdeck trailers, updated 12 June 2026.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 221: Overall length of vehicle, accessed November 2026.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 223: Overall width of vehicle, accessed November 2026.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 224: Overall height of vehicle, accessed November 2026.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 227: Projections in case of vehicle other than motor cycle, motor tricycle or pedal cycle, accessed November 2026.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 229: Warning in respect of projecting load, accessed November 2026.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 246: Manner in which goods to be carried, accessed November 2026.
- Department of Transport (Government Gazette 38142), Amendment of the National Road Traffic Regulations, 2000 (GN R. 846): driving licence codes, 31 October 2014.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 115: Certain drivers to have professional driving permit, accessed November 2026.
Last checked: 19 November 2026
How Headcore works
- Posting a request is free.
- Your request goes to companies that do the kind of work you describe.
- A supplier answers with a response that says how they would do the job. You read the responses and decide who to talk to.
Questions buyers ask
What does it cost to post a request?
Posting a request is free. A supplier pays one token when it decides your request is worth answering. What you agree about the work is between you and the supplier.
Who sees my request?
Companies that do this specific work, within reach of your site. They see the job. Whether they also see your company name is your choice: you can stay anonymous until you pick who to talk to.
What if nobody responds?
Your request reaches companies that do this work within minutes. Each decides for itself whether to respond, so we cannot promise responses. If the work cannot wait, contact your usual suppliers as well.
Can I ask for several trucks over weeks or months?
Yes. Say how many trucks, for how long and how many loads a day. Suppliers respond to the work as described, and you agree the terms with the one you choose.
Does Headcore transport the load?
No. Headcore is a matching system: it puts your request in front of companies that do this work, and you deal with the supplier directly. Keep your usual suppliers; use Headcore when they cannot help, or when the job is outside what they do.
Is a flat deck truck the same as a flatbed truck?
Both names describe a truck that carries its load on an open deck. The trade sources used here call the body a flatdeck and list a dropside body as a separate option. Give the load and the deck length you need, and ask what body the truck has.
Does the driver need a professional driving permit?
A driver of a goods vehicle with a GVM above 3,500 kg needs a professional driving permit, with listed exceptions, and the licence code follows the GVM and any trailer. Ask whether the driver comes with the truck, and say so in your request if you will drive it yourself.
What if the load sticks out past the back of the deck?
The load may project up to 1,800 mm beyond the rear, as long as the vehicle and load stay within the legal overall length. Beyond 300 mm it needs red flags by day and red and yellow reflectors or lamps at night. Give the length of the longest piece so suppliers can choose a deck for it.
Start with what you know.
A sentence or two is enough. Nothing reaches suppliers until you review and post it.
Start your request