Skip to content

What is a lowbed trailer, and what does it carry in South Africa?

Lowbed trailer: a semi-trailer with its deck set low between the neck and the wheels, so tall plant such as an excavator or dozer can travel within the 4.3 m road height limit.[7][10][1]

Also called Lowbed, Low-bed, Low loader, Lowboy

  • A lowbed trailer has a deck dropped low so machines stay under the legal overall height of 4.3 m, load included.
  • One South African maker builds lowbeds with a hydraulic neck or folding gooseneck, from 16.43 m to 25 m long and from 35 to 120 ton.
  • Height is not the only limit: a machine wider than 2.6 m, or a load over the mass limits, needs an exemption permit however low the deck.

Need one?34 ton side tipper truck hireHaulage

Headcore13 sources

What work do you need done?

What is a lowbed trailer used for?

A lowbed trailer carries heavy machinery, construction and mining equipment and oversized loads. One South African trailer maker lists excavators, bulldozers, loaders and cranes among its loads, and says the low deck lets it carry tall and oversized equipment.[7]

In public plant hire, the Cape Winelands District Municipality's tender, which closed on 19 March 2025, asked for a mechanical horse and lowbed trailer for plant of 20 to 40 tons, priced per lead kilometre. A general reference adds generators and transformers to the loads such a trailer moves.[12][10]

The deck is the part that makes the trailer. A lowbed, called a lowboy in North America, is a semi-trailer with two drops in deck height, one after the neck and one before the wheels, which keeps the deck extremely low between them.[10]

A step deck is a different trailer. One South African maker describes its stepped deck as carrying taller loads within road height regulations, with a lower rear section, but it has a fixed round or square neck and a shorter body of 15.3 m or 16.2 m.[8]

What sizes and configurations do lowbed trailers come in?

Lowbed trailers differ by neck, axles, length and rated size. The rows below come from one South African maker's two product pages, one archived 2025 listing of an imported four-axle low-deck unit, and the Department of Transport's TRH 11 definition of a multi-axle trailer, a related heavy-load type.[7][8][9][4]

What sizes and configurations do lowbed trailers come in?
TypeAxles and neckLengthRated size
Step deck (maker's page)Triaxle, fixed round or square neck15.3 m or 16.2 m35 to 60 ton
Lowbed (maker's page)Hydraulic neck or folding gooseneck16.43 m up to 25 m35 to 120 ton
Four-axle low-deck unit (one 2025 listing)Four axles with air suspension, 3,700 mm gooseneck8,800 mm working platform, 2,540 mm wide59,850 kg payload as listed; deck 860 mm at maximum load, hitch 1,220 mm under load
Multi-axle or modular trailer (TRH 11, a related type)Axles spread under the deck or in a front and a rear group, all fully steerable; tow bar or variable gooseneckModular: set by the modules coupledNot stated in TRH 11

Sources:[7][8][9][4]

How low must the deck be, and when does the load need a permit?

To travel without an exemption permit, the deck must keep machine and trailer together under 4.3 m, because regulation 224(b) of the National Road Traffic Regulations, 2000 bars operating on a public road a motor vehicle "together with any load thereon" whose overall height exceeds "four comma three metres". The consolidated text on Acts Online still reads that way, with no amendment noted against it.[1][2]

Width is the other limit. Regulation 223(b) caps a goods vehicle of 12,000 kg gross vehicle mass or more at 2.6 m overall width, and regulation 227(1)(a)(i) bars its load from projecting more than 1.3 m either side of the vehicle's centre-line, so a machine wider than 2.6 m on the deck needs an exemption permit however low the deck is. A trailer's rated gross figure is a different measure, explained under GVM.[1]

A low deck has a limit of its own when the load is abnormal. For a vehicle moving under an abnormal load permit, TRH 11 sets at least 150 mm of ground clearance under laden mass, and a trailer with less must be able to lift to 150 mm to cross an undulation. For loads of 20.0 to 25.0 m, or wheelbases above 14.5 m, it requires steerable rear axles or steerable dollies.[4]

A load that exceeds a dimension or mass limit is abnormal and moves under an exemption permit. The permit, the escorts and the route are explained in abnormal load permits, and TRH 11 says a permit is only considered for an indivisible load.[4]

What should you specify when hiring a lowbed trailer?

In practice, give the machine's make, model, mass and transport length, width and height from its maker's sheet, and ask the haulier for the trailer's loaded deck height and rated payload. The permit application form asks for the make and model of earthmoving or mobile equipment, and whether any portion of the load has been removed and, if not, why.[5][11]

Say whether the machine is driven on over the neck or ramps or lifted by crane. In practice the neck decides how it gets on: a general reference describes fixed necks that stop loading over the front, and detachable or folding goosenecks, a folding one folding down to ground level to give a ramp. Where the machine is driven on at a construction site, regulation 23(1)(d) of the Construction Regulations, 2014 requires the contractor to ensure its operator is trained, certified competent, authorised in writing and holds a medical certificate of fitness.[10][7][6]

Ask for the rate basis in writing. Moretele Local Municipality's final 2025/26 tariff charges R39.87 a kilometre for hiring its low-bed and does not state whether VAT is included. The full hire guide is lowbed truck for hire.[13]

A worked example

Take one maker's 2013 sheet for a 22-tonne class excavator: 22,309 to 22,910 kg, 3.18 m high with the shorter 2.42 m arm (3.01 m with the 2.91 m arm) and 2.82 to 3.19 m wide over the tracks. A deck 860 mm high at maximum load, the figure on one 2025 four-axle listing, puts the top of the machine at 3.18 plus 0.86, which is 4.04 m, so 0.26 m under the 4.3 m limit of regulation 224(b), assuming the sheet's height is the machine's highest point as carried. The deck can be at most 4.3 minus 3.18, or 1.12 m high, for that machine. The height passes, but the width does not: 2.82 m is more than the 2.6 m that regulations 223(b) and 227(1)(a)(i) allow, so this machine still moves under an exemption permit.[11][9][1]

Questions buyers ask

What is the difference between a lowbed and a step deck?

A step deck has a stepped deck with a lower rear section, and one South African maker lists it with a fixed neck, as a triaxle, from 35 to 60 ton. The same maker's lowbed has a hydraulic neck or folding gooseneck and comes in sizes up to 120 ton, and a general reference describes the lowbed's deck as dropping twice, after the neck and before the wheels.[8][7][10]

How long is a lowbed trailer?

One South African maker lists lowbeds from 16.43 m to 25 m. The legal overall length of a truck-tractor and semi-trailer is 18.5 m (regulation 221(d)), and TRH 11 allows an articulated vehicle up to 26 m under a permit.[7][1][3][4]

Can a lowbed carry a machine wider than 2.6 m?

Only under an exemption permit. Regulation 223(b) caps the overall width of a goods vehicle of 12,000 kg GVM or more at 2.6 m, and regulation 227(1)(a)(i) bars its load from projecting more than 1.3 m either side of the vehicle's centre-line. See abnormal load permits for who issues it.[1][4]

How much ground clearance must a lowbed have?

When it carries an abnormal load under permit, TRH 11 sets a ground clearance of at least 150 mm under laden mass. A trailer with less must be able to lift to 150 mm when it has to cross an undulation in the road surface.[4]

What work do you need done?

Sources

  1. Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225): regulations 221, 223, 224 and 227, 17 March 2000.
  2. Acts Online (consolidated text), National Road Traffic Regulations, 2000: regulation 224, overall height of vehicle and load, 17 March 2000, as consolidated, read 18 November 2026.
  3. Acts Online (consolidated text), National Road Traffic Regulations, 2000 (GN R. 225 of 2000, as amended): regulations 221 to 241, 17 March 2000, as consolidated, read 18 November 2026.
  4. Department of Transport, Committee of Transport Officials, TRH 11: Dimensional and Mass Limitations and Other Requirements for Abnormal Load Vehicles, 8th edition, revision 2, March 2010, revision 2 of September 2017.
  5. Department of Transport, Committee of Transport Officials, Administrative Guidelines for Granting of Exemption Permits for the Conveyance of Abnormal Loads, version 1.0, revision 4 (Appendix A: permit application form), March 2010, revision 4 of May 2021.
  6. Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84), 7 February 2014.
  7. SA Truck Bodies, Lowbed trailer, Read 18 November 2026.
  8. SA Truck Bodies, Stepdeck trailer, Read 18 November 2026.
  9. Truck1 South Africa (archived listing; seller in Poland), Faymonville Multi-N-4(2+2) low loader semi-trailer, 2025: specification, 2025 model year, archived listing read 18 November 2026.
  10. Wikipedia, Lowboy (trailer), Read 18 November 2026.
  11. John Deere, 210G and 210G LC excavators: specifications (DKAX210G), January 2013.
  12. Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (specification and pricing schedules), Closing date 19 March 2025.
  13. Moretele Local Municipality, Final 2025/26 schedule of rates and tariffs (machinery and equipment hire), 2025/26 financial year.