What is GVM (gross vehicle mass) on a South African truck?
GVM: the maximum mass of a motor vehicle together with its load, as specified by its manufacturer or, where the manufacturer gives none, as determined by the registering authority.[1]
Also called Gross vehicle mass, Gross vehicle weight, BVM
- GVM is the heaviest a single vehicle may be with its own mass and its load together, and a goods vehicle may not exceed it on a public road.
- Payload is the GVM minus the tare, and any body fitted to a truck comes off that figure.
- A goods vehicle's GVM sets the driver's licence code (3,500 and 16,000 kg) and whether a professional driving permit is needed (above 3,500 kg).
Need one?34 ton side tipper truck hireHaulage
Headcore7 sources
What work do you need done?
What does GVM mean in South Africa?
GVM stands for gross vehicle mass, the most that one vehicle and its load may weigh together. The National Road Traffic Act 93 of 1996 defines it as "the maximum mass of such vehicle and its load as specified by the manufacturer thereof or, in the absence of such specification, as determined by the registering authority".[1]
The figure is the maker's rating, not a measurement of the vehicle on the day. A document issued by the manufacturer stating the GVM of a model is prima facie proof of it (section 72 of the Act). Regulation 245 of the National Road Traffic Regulations, 2000 requires a goods vehicle with a GVM above 3,500 kg to carry a metal plate showing its tare, its GVM (marked GVM/BVM), its gross axle loads and, where it draws another vehicle, its gross combination mass.[1][2]
Regulation 239(1)(a) bars anyone from operating a goods vehicle on a public road if its GVM, any gross axle load or any gross axle unit load is exceeded. Regulation 236 sets a separate permissible maximum vehicle mass, which is the least of several limits, among them the sum of the permissible maximum axle loads, the GVM and the bridge limit of regulation 241, and never more than 56,000 kg. The limit that applies on the road can therefore be lower than the plate GVM, but not higher.[2]
How do GVM, tare and payload fit together?
Payload is the mass a vehicle may carry, and it is the GVM minus the tare. The Act defines tare as the mass of the vehicle ready to travel on a road, including its spare wheel, standard equipment and permanent structure but not fuel. A maker's sheet gives the figures side by side, though its tare may count some fuel: the 2023 sheet below includes 15 litres in its tare.[1][6]
| Figure | Rigid truck A (2023 sheet) | Rigid truck B (2021 sheet) |
|---|---|---|
| Gross vehicle mass (GVM) | 14,000 kg | 9,600 kg |
| Tare, total | 3,900 kg | 3,310 kg |
| Permissible body plus payload | 10,100 kg | 6,290 kg |
| GVM minus tare (a calculation) | 10,100 kg | 6,290 kg |
| Lowest driver's licence code for that GVM, no trailer over 750 kg (regulation 99) | C1 | C1 |
| Professional driving permit needed (regulation 115(1)(a)) | Yes | Yes |
How is GVM different from GCM?
Which driver's licence and permit does a GVM decide?
A goods vehicle's GVM sets the driver's licence code. Regulation 99, as restated by GN R. 846 of 2014, gives code B for a goods vehicle of up to 3,500 kg GVM, code C1 above 3,500 kg up to 16,000 kg, and code C above 16,000 kg, each with or without a trailer of up to 750 kg GVM. A trailer above 750 kg GVM moves the driver to code EB, EC1 or EC.[3]
Regulation 115(1)(a) of the National Road Traffic Regulations, 2000 requires the driver of a goods vehicle with a GVM above 3,500 kg to hold a professional driving permit, subject to the exceptions in regulation 115(2), such as a learner driver accompanied by a permit holder. The same 3,500 kg line therefore separates a code B vehicle from one that needs both a heavier licence code and a permit.[2]
The same line decides a second registration, of the operator: regulation 265(1)(a) requires an operator to be registered in respect of a goods vehicle whose GVM exceeds 3,500 kg (see operator card).[5][4]
A worked example
Take one maker's September 2023 sheet for a rigid truck: GVM 14,000 kg and tare 3,900 kg. Then 14,000 minus 3,900 leaves 10,100 kg for the body and the load, the figure the sheet gives as permissible body plus payload. Every kilogram of body fitted comes off that 10,100 kg, so a body and load together weighing 10,500 kg would put the truck at 14,400 kg, which is 400 kg over its GVM and barred on a public road by regulation 239(1)(a). Because 14,000 kg lies above 3,500 kg and not above 16,000 kg, its driver needs at least a code C1 licence and, as the GVM is above 3,500 kg, a professional driving permit.[6][2][3]
Questions buyers ask
What does GVM stand for?
Gross vehicle mass. The National Road Traffic Act defines it as the maximum mass of a vehicle and its load, as specified by the manufacturer. The plate that regulation 245 requires on a goods vehicle marks it "GVM/BVM", BVM standing for bruto voertuigmassa, the term in the regulations' Afrikaans text.[1][2]
Is GVM the same as payload?
No. GVM includes the vehicle's own mass, the tare. Payload is what is left after the tare, and a body fitted to a truck uses part of it: one maker's sheet for a 14,000 kg GVM truck with a 3,900 kg tare gives 10,100 kg as permissible body plus payload.[1][6]
Where do I find a vehicle's GVM?
On the metal plate that regulation 245 requires on a goods vehicle with a GVM above 3,500 kg, fixed on a door post, under the bonnet or on the dashboard, or on a trailer's left side. A document issued by the manufacturer stating the GVM of the model is prima facie proof of it (section 72 of the Act).[2][1]
Can a truck carry more than its GVM if the axles can take it?
No. Regulation 239(1)(a) bars operating a goods vehicle on a public road if its GVM or any gross axle load is exceeded, so each limit applies on its own. Regulation 236 then takes the least of the limits it lists as the permissible maximum vehicle mass.[2]
What work do you need done?
Sources
- Department of Transport (Government Gazette 17603), National Road Traffic Act 93 of 1996: section 1 (definitions) and section 72, 22 November 1996.
- Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225): regulations 115, 236, 237, 239, 241 and 245, 17 March 2000.
- Department of Transport (Government Gazette 38142), Amendment of the National Road Traffic Regulations (GN R. 846): regulation 99 (licence codes) and regulation 237, 31 October 2014.
- Department of Transport (Government Gazette 29865), Amendment of the National Road Traffic Regulations (GN R. 404): regulation 41 (regulation 265(1)) and regulation 42 (regulation 266(1): "and" deleted from paragraph (a), category P inserted as paragraph (c)), 4 May 2007.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 265: Classes of motor vehicles in respect of which operator to be registered, 17 March 2000, regulation 265(1) as substituted by GN R. 404 of 2007.
- Isuzu Trucks South Africa, ISUZU FSR 800 specification sheet (mass data: tare, GVM, GCM, permissible body plus payload), September 2023.
- Daimler Truck Southern Africa (FUSO), FUSO FA9-137L specification sheet (mass data: GVM, tare, permissible body plus payload), March 2021.