What is gross combination mass (GCM) for a truck and its trailers?
GCM: the maximum mass of a combination of motor vehicles, including the drawing vehicle and the load, as specified by the manufacturer or, where the maker gives none, as determined by the registering authority.[1]
Also called Gross combination mass, BKM, Combination mass
- GCM is a rating on the drawing vehicle for the whole combination, and it can sit far above the legal cap on that combination: one maker's 6x4 truck-tractor is rated 65,000 kg.
- The legal ceiling is the least of several limits and never more than 56,000 kg (48,000 kg behind a haulage tractor with one driving axle), so the GCM rating is only one of the numbers that bind.
- For an articulated vehicle the truck-tractor's GCM, not the trailer's GVM, decides the driver's licence code: EB, EC1 or EC.
Need one?34 ton side tipper truck hireHaulage
Headcore8 sources
What work do you need done?
What does GCM cover that the GVM of a truck does not?
GCM belongs to the drawing vehicle and covers the whole set. The Act defines it "in relation to a motor vehicle which is used to draw any other motor vehicle" as the maximum mass of the combination, including the drawing vehicle, and load. A trailer has its own GVM, while the drawing vehicle's GCM spans the whole combination.[1]
A maker's sheet states the two figures side by side. One rigid truck sheet gives a GVM of 14,000 kg and a GCM of 18,000 kg. One truck-tractor sheet gives a GVM of 26,000 kg, a GCM of 65,000 kg and a D/T of 65,000 kg, D/T being the permissible maximum drawing vehicle mass, with a tare of 8,375 kg.[8][6]
The Act separates three kinds of drawing vehicle. A haulage tractor is designed or adapted mainly for drawing other vehicles, with a GCM exceeding 24,000 kg; a tractor is designed or adapted mainly for drawing other vehicles, with a GCM not exceeding 24,000 kg; and a truck-tractor is designed for drawing other vehicles and not to carry any load other than that imposed by a semi-trailer or by ballast. Neither tractor definition includes a truck-tractor, whatever its GCM. These definitions come from the 2008 amendment, and they decide which limits in regulations 237 and 239 apply.[2]
Which limits cap a combination, and where does 56,000 kg come from?
Regulation 237 bars operating a combination whose permissible maximum combination mass is exceeded, and makes that figure the least of five limits: the sum of the permissible axle and axle unit massloads, regulation 239(1)(b), regulation 239(2), regulation 239(3) and the bridge formula of regulation 241. The result may not exceed 56,000 kg, or 48,000 kg where the drawing vehicle is a haulage tractor with a single driving axle (the second limit added by GN R. 846 of 2014).[3][4][5]
Regulation 239(1)(b) is the GCM itself: no one may operate a goods vehicle drawing another if its GCM is exceeded. The other two limits are not ratings. Regulation 239(2) caps the mass at the net engine power in kilowatts times 240, or times 400 where the drawing vehicle is a tractor or haulage tractor. Regulation 239(3) caps it at five times the total axle massload of the driving axles, or six times behind a haulage tractor.[3][4]
Regulation 244(c) names the least of 239(1)(b), (2) and (3) the permissible maximum drawing vehicle mass, "D/T", and regulation 245 puts it on the vehicle plate beside the GCM, marked GCM/BKM. The bridge formula is separate: the axles of any group, other than a single axle unit on its own, may carry no more than the group's dimension in metres from the first to the last axle centre, times 2,100, plus 18,000 kg (regulation 241).[3]
Regulation 241(3)(b) rounds a measured dimension up to the next tenth of a metre. By calculation, 18.0 m allows 55,800 kg and 18.1 m allows 56,010 kg, so a superlink or interlink at 56,000 kg needs the outer axles of the group more than 18.0 m apart.[3]
Which driver's licence code does a combination need?
For an articulated vehicle, regulation 99 as restated by GN R. 846 of 2014 reads the GCM of the truck-tractor. For a rigid goods vehicle with a trailer, it reads the GVM of the vehicle and asks whether the trailer's GVM exceeds 750 kg. Code EC also authorises driving a haulage tractor.[4]
| Combination | Code | What decides it |
|---|---|---|
| Articulated vehicle, truck-tractor GCM up to 3,500 kg | EB | Truck-tractor GCM |
| Articulated vehicle, truck-tractor GCM above 3,500 kg up to 16,000 kg | EC1 | Truck-tractor GCM |
| Articulated vehicle, truck-tractor GCM above 16,000 kg | EC | Truck-tractor GCM |
| Goods vehicle above 3,500 kg up to 16,000 kg GVM with a trailer above 750 kg GVM | EC1 | Vehicle GVM and trailer GVM |
| Goods vehicle above 16,000 kg GVM with a trailer above 750 kg GVM | EC | Vehicle GVM and trailer GVM |
Sources:[4]
What should a haulier state before a combination loads?
A buyer cannot read a rating off a quote and assume the load is legal. Regulation 330A(2) makes a consignor require from the operator a written submission of the payload and its distribution, and regulation 330B requires a method of establishing mass and a record of every load leaving the premises. A weighbridge ticket gives the loaded mass to set against the limits above. A request can ask for:[4]
- the truck-tractor's GCM and D/T as marked on its plate, and its tare;[3]
- the tare of each trailer, including a lowbed trailer when plant is moving, so that tractor tare, trailer tare and machine mass can be added and compared with the lowest limit;[3]
- the axle spacing of the combination, since the bridge formula may bind before the GCM does;[3]
- the licence code of the driver against the truck-tractor's GCM.[4]
A worked example
Take one maker's 6x4 truck-tractor: GCM 65,000 kg, tare 8,375 kg and 324 kW. Behind it runs one maker's flatdeck superlink whose two trailers have a tare of 8,227 kg. On the rating alone the load is 65,000 minus 8,375 minus 8,227, which is 48,398 kg. Regulation 237 caps the combination at 56,000 kg, so the load is at most 56,000 minus 8,375 minus 8,227, which is 39,398 kg, 9,000 kg less than the rating allows. The power limit does not bind: 324 times 240 is 77,760 kg. The driving-axle limit of regulation 239(3) holds as long as at least a fifth of the combination, 11,200 kg at 56,000 kg, sits on the driving axles. Axle loads and the bridge formula can still cut the figure further, and the Act's tare leaves out fuel while this sheet does not say whether its tare includes it.[6][7][3][4][1]
Questions buyers ask
Is GCM the same as the 56,000 kg limit?
No. GCM is the maker's rating (or the registering authority's figure where there is none) for one drawing vehicle. The 56,000 kg in regulation 237 is a legal ceiling for any combination, and the permissible mass is the least of several limits. A truck-tractor rated at 65,000 kg is still held to 56,000 kg.[1][3]
Does a rigid truck have a GCM?
Yes, if it draws another vehicle. The Act defines GCM for a motor vehicle used to draw another, and regulation 245 puts it on the plate of such a vehicle. One rigid truck sheet gives 14,000 kg GVM and 18,000 kg GCM.[1][3][8]
Does a trailer have its own GCM?
Only if it draws another vehicle. The Act defines GCM for a motor vehicle used to draw another motor vehicle, and its definition of motor vehicle includes a trailer. A semi-trailer behind a truck-tractor carries its own GVM, and regulation 245 also puts its gross kingpin massload, marked GKM/BSM, on its plate.[1][3]
What limit applies behind a haulage tractor?
A haulage tractor is designed or adapted mainly for drawing other vehicles and has a GCM above 24,000 kg; the definition excludes a truck-tractor, so a truck-tractor rated above 24,000 kg is not one. With a single driving axle, regulation 237 limits a haulage tractor's combination to 48,000 kg, not 56,000 kg. Its power limit uses 400 instead of 240, and its driving-axle limit uses six times instead of five.[2][4]
What work do you need done?
Sources
- President's Office (Government Gazette 17603), National Road Traffic Act 93 of 1996: section 1 (definitions of gross combination mass, motor vehicle and tare), 22 November 1996.
- The Presidency (Government Gazette 31907), National Road Traffic Amendment Act 64 of 2008: section 1 (haulage tractor, tractor and truck-tractor), 17 February 2009.
- Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225) as made: regulations 237, 239, 241, 244 and 245, 17 March 2000.
- Department of Transport (Government Gazette 38142), Amendment of the National Road Traffic Regulations (GN R. 846): regulations 28 (regulation 99), 55 (regulation 237), 56 (regulation 239) and 73 (regulations 330A and 330B), 31 October 2014.
- National Road Traffic Regulations, 2000 (text at Acts Online), Regulation 237: Permissible maximum combination mass, 17 March 2000, regulation 237 proviso as substituted by GN R. 846 of 2014.
- Focus on Transport (Transport Manager's Handbook 2021), MAN specifications: mass data for the 26.440 6x4 truck-tractor, February 2021.
- Prime Trailers (Pty) Ltd, High Cube Flatdecks: AT3 tridem and AT4 superlink specification sheet, Undated (file created 25 March 2019), read 19 November 2026.
- Isuzu Trucks South Africa, ISUZU FSR 800 specification sheet (mass data: tare, GVM, GCM, permissible body plus payload), September 2023.