Skip to content

What is a truck tractor, and how does it pull a semi-trailer?

Truck tractor: a motor vehicle designed or adapted for drawing other vehicles and not to carry any load other than that imposed by a semi-trailer or by ballast, but not a tractor or a haulage tractor.[2][3]

Also called Horse, Truck-tractor

  • In law a truck-tractor is built to pull, and to carry only the load a semi-trailer imposes on it, or ballast. With a semi-trailer it forms an articulated motor vehicle, held to 18.5 m by regulation 221(d). One South African trade guide calls it the horse, the everyday word.
  • On one maker's sheet the 4x2 and 6x2 truck-tractors are rated 45,000 kg GCM and the 6x4 65,000 kg. The law caps a truck-tractor combination at 56,000 kg, and the axle limits of regulation 240 can cap it lower.
  • The driver needs code EC when the truck-tractor's GCM is above 16,000 kg. The semi-trailer's kingpin load is rated separately and marked GKM on its plate.

Need one?34 ton side tipper truck hireHaulage

Headcore15 sources

What work do you need done?

What is a truck tractor, and what does the fifth wheel do?

A truck-tractor is the powered unit of an articulated truck: a cab and engine with no load body, built to pull a semi-trailer. The National Road Traffic Act defines it as a motor vehicle designed or adapted for drawing other vehicles and not to carry any load other than that imposed by a semi-trailer or by ballast, and the definition excludes a tractor and a haulage tractor.[2][3]

A semi-trailer is a trailer with no front axle, so designed that at least 15 per cent of its tare is borne by the vehicle drawing it. The Act calls a truck-tractor with a semi-trailer an articulated motor vehicle. A 2026 South African trade guide says the semi-trailer rests its front end on the fifth wheel behind the cab, and calls horse the everyday word for the truck-tractor. A municipal hire tender lists a mechanical horse as an equipment category.[1][12][13]

The semi-trailer carries the kingpin that couples to the fifth wheel. Regulation 245 makes a semi-trailer's plate show its gross kingpin massload, GKM, as specified by the manufacturer, and one trailer maker's sheet lists a 2 inch block-type kingpin welded in. Under the Act's definition, the load that a semi-trailer imposes, or ballast, is the only load a truck-tractor is designed to carry.[4][14][2]

Which axle layouts does a truck tractor come in, and what is each rated for?

The two figures name the layout. One truck maker's guide explains that the first counts wheel positions and the second the driven ones, and that halving both gives the axles: a 4x2 has two axles with one driven, a 6x2 three with one driven and a 6x4 three with two driven. The masses below are another maker's sheet. Its permissible axle figures are the lower of the maker's rating and the legal limit, which is why they differ from the ratings.[11][10][4]

Which axle layouts does a truck tractor come in, and what is each rated for?
LayoutAxlesMaker's GCM and tareRear axle on the same sheet
4x2Two axles, one drivenGCM 45,000 kg, tare 6,485 to 6,679 kgRated 13,000 kg, permissible 9,000 kg, the regulation 240 limit for one axle on four wheels
6x2Three axles, one drivenGCM 45,000 kg, tare 8,135 kgRated 23,000 kg, permissible 18,000 kg for the two-axle unit
6x4Three axles, two drivenGCM 65,000 kg, tare 8,375 to 8,867 kg; the rating sits above the 56,000 kg legal capRated 23,000 kg, permissible 18,000 kg, the regulation 240 limit for two axles on four wheels each

Sources:[11][10][4][9][8][5]

What do the Act and the road traffic regulations say about a truck tractor?

The definitions come from the National Road Traffic Amendment Act 64 of 2008 and read the same on the consolidated text. A truck-tractor is not a tractor, defined as a vehicle designed or adapted mainly for drawing other vehicles with a GCM not exceeding 24,000 kg, nor a haulage tractor, the same with a GCM above 24,000 kg. A truck-tractor stays outside both whatever its GCM.[2][3]

Regulation 221(d) bars operating an articulated motor vehicle, or any other combination of a drawing vehicle and a semi-trailer, above 18.5 m overall including any drawbar or coupling. Any other combination, such as a truck-tractor with two trailers, may run to 22 m under regulation 221(g). Regulation 237 caps the combination mass at 56,000 kg; the GCM page sets out the limits behind that figure.[4][7][8][5]

Regulation 99, as restated by GN R. 846 of 2014, gives code EC for an articulated motor vehicle whose truck-tractor has a GCM above 16,000 kg, code EC1 above 3,500 kg up to 16,000 kg and code EB up to 3,500 kg. Code EC also authorises driving a haulage tractor.[5]

What should a request say about the truck tractor?

A request can describe the load and the trailer and leave the choice of truck-tractor to the supplier, but a few details prevent a mismatch. Ask for:[4]

  • the truck-tractor's GCM and tare from its plate, and the tare of the trailer, so the payload can be checked against the 56,000 kg cap and the axle limits;[4][8]
  • the trailer type and its axles: one trailer maker lists a 12.2 m tandem semi and a 13.5 m triaxle semi (see tri axle trailer), and for a machine, whether a lowbed trailer is meant;[15]
  • whether the work needs one trailer or two, a superlink or interlink, which regulation 221(g) allows to 22 m;[7][12]
  • the driver's licence code, EC when the truck-tractor's GCM is above 16,000 kg;[5]
  • a rigid truck instead, where the load fits one chassis within 12.5 m.[7][12]

A worked example

Take two truck-tractors from one maker's sheet, each drawing one maker's tridem flatdeck of 6,820 kg tare on dual tyres. Regulation 240 allows a steering axle on two wheels 7,700 kg, one axle on four wheels 9,000 kg, two axles on four wheels each 18,000 kg and a unit of three or more such axles 24,000 kg, and regulations 234 and 235 take the lower of each limit and the maker's axle rating. The 4x2, tare 6,679 kg and GCM 45,000 kg, is rated only 7,500 kg on its front axle, so its axles allow 7,500 plus 9,000 plus 24,000, which is 40,500 kg, and the load is at most 40,500 minus 6,679 minus 6,820, which is 27,001 kg. The 6x4, tare 8,375 kg and GCM 65,000 kg, is rated above the regulation on both axle groups, so 7,700 plus 18,000 plus 24,000 is 49,700 kg, and the load is at most 49,700 minus 8,375 minus 6,820, which is 34,505 kg. Both are calculations, not stated payloads, and the trailer's own sheet states a payload of 32,768 kg, below the 6x4 figure. The trailer's kingpin rating, the bridge formula and tyre limits can cut them further, and 56,000 kg is never reached with these axle groups.[10][14][4][9][6][8]

Questions buyers ask

Is a truck tractor the same as a horse?

One 2026 South African trade guide says so: it calls horse the everyday word for the truck-tractor, and a municipal hire tender lists a mechanical horse. The Act and the regulations use only truck-tractor, which the Act defines by what the vehicle is designed to do: draw other vehicles and carry only the load a semi-trailer imposes, or ballast.[12][13][2]

Can a truck tractor carry a load on its own?

Not as a truck-tractor. The definition covers a vehicle designed or adapted not to carry any load other than that imposed by a semi-trailer or by ballast. A truck with a cargo body on the same chassis is a rigid truck, held to 12.5 m overall under regulation 221(f).[2][7][12]

Which driver's licence does a truck tractor need?

Code EC when the truck-tractor's GCM is above 16,000 kg, code EC1 from above 3,500 kg up to 16,000 kg and code EB up to 3,500 kg, under regulation 99 as restated in 2014. Check the GCM on the plate against the code on the driver's licence card.[5][4]

What is the difference between a truck tractor and a tractor?

The Act defines them separately. A tractor is designed or adapted mainly for drawing other vehicles with a GCM not above 24,000 kg, and a haulage tractor is the same above 24,000 kg. Both definitions exclude a truck-tractor, so a truck-tractor rated above 24,000 kg GCM, like those on this page, is not a haulage tractor.[2][3]

What work do you need done?

Sources

  1. President's Office (Government Gazette 17603), National Road Traffic Act 93 of 1996: section 1 (definitions of articulated motor vehicle and semi-trailer), 22 November 1996.
  2. The Presidency (Government Gazette 31907), National Road Traffic Amendment Act 64 of 2008: section 1 (haulage tractor, tractor and truck-tractor), 17 February 2009.
  3. Acts Online, National Road Traffic Act, 1996, section 1: Definitions (consolidated text, truck-tractor), Read 19 November 2026.
  4. Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225) as made: regulations 1, 221, 234 to 241 and 245, 17 March 2000.
  5. Department of Transport (Government Gazette 38142), Amendment of the National Road Traffic Regulations (GN R. 846): regulation 28 (regulation 99, licence codes EB, EC1 and EC) and regulation 55 (regulation 237), 31 October 2014.
  6. Department of Transport (Government Gazette 34407), Amendment of the National Road Traffic Regulations (GN R. 541): regulation 9 (regulation 240(g) substituted, 24,000 kg), 29 June 2011.
  7. Acts Online, National Road Traffic Regulations, 2000, regulation 221: Overall length of vehicle (consolidated, amending notices listed), Read 19 November 2026.
  8. Acts Online, National Road Traffic Regulations, 2000, regulation 237: Permissible maximum combination mass, Read 19 November 2026.
  9. Acts Online, National Road Traffic Regulations, 2000, regulation 240: Massload carrying capacity of road (consolidated, amending notices listed), Read 19 November 2026.
  10. Focus on Transport (Transport Manager's Handbook 2021), MAN specifications: mass data for the TGS 19.360 and 19.440 4x2, 25.440 6x2 and 26.440 6x4 truck-tractors, February 2021.
  11. China National Heavy Duty Truck Group (Sinotruk), What do 4×2, 6×2 and 6×4 mean? Understanding truck drive configurations, 17 December 2024.
  12. Kweli Corridor Network, Truck Configurations in South Africa (2026): 6x4 Horse, Interlink, Superlink & Tri-Axle, Published 16 August 2026, updated 7 November 2026.
  13. Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (specification and pricing schedules), Closing date 19 March 2025.
  14. Prime Trailers (Pty) Ltd, High Cube Flatdecks: AT3 tridem and AT4 superlink specification sheet, Undated (file created 25 March 2019), read 19 November 2026.
  15. SA Truck Bodies, Flatdeck Trailers, Published 22 May 2025, updated 12 June 2026.