Skip to content

What is a rigid truck, and how does it differ from an articulated truck?

Rigid truck: a truck whose cab and cargo body sit on one chassis with no coupling between them, as opposed to an articulated vehicle, where a truck-tractor pulls a semi-trailer.[7][1]

Also called Rigid, Rigid vehicle, Single vehicle, Straight truck

  • A rigid truck is a single vehicle, held to 12.5 m overall by regulation 221(f). Adding a drawbar trailer makes it a combination with a 22 m limit under regulation 221(g).
  • The driver's licence follows the truck's GVM: code C1 above 3,500 kg up to 16,000 kg, code C above 16,000 kg, and code EC1 or EC once a trailer above 750 kg is coupled.
  • The axle layout, 4x2, 6x4 or 8x4, sets an upper bound on the mass the truck may legally carry, because regulation 236 caps a vehicle at the least of the sum of its axle and axle-unit limits, which regulation 240 sets by axle and wheel count, and other limits.

Need one?34 ton side tipper truck hireHaulage

Headcore11 sources

What work do you need done?

What is a rigid truck, and when is one used?

A rigid truck is a single chassis carrying the engine, the cab and the cargo body, with no coupling and nothing towed. A 2026 trade guide says rigids do distribution work: deliveries into towns, retail runs and multi-drop loads to yards with tight access, at a lower running cost and with less payload than a combination.[7]

An articulated vehicle is two units, a truck-tractor and a semi-trailer that rests on the truck-tractor's fifth wheel. Regulation 221(d) names it "an articulated motor vehicle or any other combination of motor vehicles consisting of a drawing vehicle and a semi-trailer". A rigid can also carry a tipping body, covered under tipper truck and tipper truck hire.[1][7][9]

A rigid can also draw a trailer on a drawbar. Regulation 222(1)(a) allows "a drawing vehicle and one or two trailers", and the 2026 trade guide counts a rigid with a drawbar trailer as its own configuration with a 22 m limit. Two trailers behind a truck-tractor are covered under superlink and interlink.[1][7]

What do 4x2, 6x4 and 8x4 mean, and how heavy is each?

The figures name the axle layout. One truck maker's guide explains that the first number counts wheel positions and the second the driven ones, and that halving both gives the axles: 4x2 is two axles with one driven, 6x4 is three axles with two driven and 8x4 is four axles with two driven. The masses below are another maker's ratings, not legal limits.[4][11][8]

What do 4x2, 6x4 and 8x4 mean, and how heavy is each?
LayoutAxlesExample GVMLicence code by GVM
4x2Two axles, one driven14,000 kg to 15,500 kgC1
6x4Three axles, two driven25,500 kgC
8x4Four axles, two driven33,000 kg to 35,000 kgC

Sources:[4][11][8][9][10][2]

How does a rigid compare with an articulated truck?

Regulation 221 sets a different overall length limit for each arrangement, and the licence code follows the mass of the powered vehicle.[1][2]

How does a rigid compare with an articulated truck?
Rigid truckArticulated truck
Overall length limit12.5 m, regulation 221(f)18.5 m, regulation 221(d)
With trailers behind22 m with a drawbar trailer, regulation 221(g)22 m with two trailers, regulation 221(g)
GVM or combination massGVM 11,000 kg to 35,000 kg in one maker's rangeCombination mass at most 56,000 kg under regulation 237, a legal ceiling, not a typical figure
Licence codeC1 up to 16,000 kg GVM, C above it; EC1 or EC with a trailer over 750 kgEC1 up to 16,000 kg GCM of the truck-tractor, EC above it
Typical useDistribution, town deliveries and multi-drop loads over short distancesTrailer swaps: one truck-tractor drops a loaded trailer and hooks an empty one

Sources:[1][2][8][10][7]

What do the road traffic regulations say about a rigid truck?

Regulation 221(f) bars operating "any other vehicles, excluding a semi-trailer" above 12.5 m overall length, including any drawbar or coupling. General Notice 2116 of 2001 (Gazette 22736, 5 October 2001) amended regulation 221 by adding a proviso that front equipment protecting the bodywork and lights, adding no more than 300 mm, is not counted in overall length. R. 1341 of 2003 raised the bus-train limit in paragraph (e) and added paragraph (eA) for buses. Neither notice changed paragraphs (d), (f) or (g), and the consolidated text on Acts Online gives the same figures.[1][3][5][6]

Regulation 99, as restated by GN R. 846 of 2014, gives code C1 for a goods vehicle with a gross vehicle mass above 3,500 kg up to 16,000 kg and code C above 16,000 kg, in each case with a trailer of at most 750 kg and not an articulated vehicle. A rigid coupled to a trailer above 750 kg needs code EC1 (GVM above 3,500 kg up to 16,000 kg) or EC (GVM above 16,000 kg). Whether the driver also needs a PrDP is a separate question.[2]

The mass of a rigid is capped from several sides. Regulation 236 sets its permissible maximum vehicle mass at the least of the sum of its axle limits, the bridge formula and other limits, never above 56,000 kg. Regulation 240 limits a steering axle with two wheels to 7,700 kg and a two-axle unit with four wheels on each axle to 18,000 kg unless it fits a listed vehicle. The GVM on the plate is the maker's rating and the legal mass can be lower.[1]

A drawbar adds its own limits. Regulation 222(2)(b) caps the drawbar of a trailer with more than one axle at 2 metres, unless an underslung coupling keeps the two vehicles within 2.5 metres of each other, and regulation 221(c) limits a trailer above 12,000 kg gross vehicle mass, other than a semi-trailer or a trailer with one axle or one axle unit, to 12.5 m excluding any drawbar or coupling.[1]

A worked example

Take one maker's 6x4 tipper sheet: GVM 25,500 kg, tare 7,530 kg, permissible body and payload 17,970 kg, and a combination rating (GCM) of 43,500 kg. Because the GVM is above 16,000 kg, a driver needs code C. Coupling a drawbar trailer above 750 kg moves the requirement to code EC. If the truck is fully loaded at 25,500 kg, 43,500 minus 25,500 leaves 18,000 kg for the trailer's own loaded mass, which stays under the 56,000 kg ceiling of regulation 237. That is a calculation from the sheet, not a figure the sheet states. The rigid is held to 12.5 m alone and the whole combination to 22 m.[9][2][1]

Questions buyers ask

What is the difference between a rigid and an articulated truck?

A rigid has its cab and body on one chassis. An articulated vehicle is a truck-tractor pulling a semi-trailer, so the combination bends in the middle. Regulation 221 limits the rigid to 12.5 m overall and the articulated vehicle to 18.5 m.[7][1]

Which licence do I need for a rigid truck?

Code C1 for a goods vehicle above 3,500 kg up to 16,000 kg GVM, and code C above 16,000 kg. With a trailer above 750 kg you need EC1 or EC instead. Check the GVM on the vehicle's plate before assigning a driver.[2]

Is an 8x4 a rigid truck?

Yes, it can be. An 8x4 is a four-axle layout with two driven axles, and in 2019 one South African maker launched 8x4 rigids rated at 33,000 kg GVM as tippers and concrete mixers and 35,000 kg GVM as compactors.[10][4]

How long can a rigid truck with a trailer be?

Regulation 221(g) allows a combination of motor vehicles up to 22 metres overall, including any drawbar or coupling. The trailer has its own limits under regulations 221(b) and (c) and the drawbar limit in regulation 222(2)(b).[1]

What work do you need done?

Sources

  1. Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225): regulations 221, 222, 236, 237 and 240 as published, 17 March 2000.
  2. Department of Transport (Government Gazette 38142), Amendment of the National Road Traffic Regulations (GN R. 846): regulation 99 (licence codes) and regulation 237, 31 October 2014.
  3. Department of Transport (Government Gazette 22736), Amendment of National Road Traffic Regulations (General Notice 2116 of 2001): regulation 43, proviso added to regulation 221, 5 October 2001.
  4. China National Heavy Duty Truck Group (Sinotruk), What do 4×2, 6×2 and 6×4 mean? Understanding truck drive configurations, 17 December 2024.
  5. Department of Transport (Government Gazette 25484), Amendment of the National Road Traffic Regulations (GN R. 1341): regulation 50 amending regulation 221, 25 September 2003.
  6. Acts Online, National Road Traffic Regulations, 2000, regulation 221: Overall length of vehicle (consolidated, amending notices listed), Read 18 November 2026.
  7. Kweli, Truck Configurations in South Africa: Rigid, Articulated & Superlink, Published 16 August 2026, updated 7 November 2026.
  8. Isuzu Motors South Africa, F-Series specifications: FRR 550 and FRR 600 (4x2, GVM 11,000 kg), FSR 800 (4x2, GVM 14,000 kg) and FTR 850 (4x2, GVM 15,500 kg), September 2023.
  9. Isuzu Motors South Africa, Isuzu FXZ 26-360 tipper chassis specification sheet (6x4), September 2023.
  10. Isuzu Motors South Africa, Isuzu extra heavies ensure growth in specialist segment (FY-Series 8x4 launch), 28 February 2019.
  11. Volvo Trucks, How to determine the right axle configuration for your truck, 14 November 2019.