Skip to content

What is a tipper truck, and how is it sized in cubes and tons?

Tipper truck: a truck that carries loose bulk material such as sand, stone and gravel in a body that tips to unload, described in South Africa by its size in cubes, meaning cubic metres.[10][3][4]

Also called Tipper, Tip truck, Rigid tipper

  • A tipper is described in cubes (cubic metres), but what it may legally carry is a mass, its GVM less its tare and body, and how many cubes reach that mass depends on the material.
  • A rigid tipper carries its body on its own chassis. End-tipping semi-trailers and side-tipping interlinks are trailer combinations, and of those two the interlink carries the bigger legal payload.
  • On a public road a tipper may not exceed its GVM or its permissible maximum vehicle mass, which regulation 236 caps at 56,000 kg, and regulation 246 bars carrying goods that are neither contained nor fastened and not protected from spilling.

Need one?Tipper truck hire with a driverHaulage

Headcore11 sources

Tell us what the tippers must move

What is a tipper truck and where is it used?

A tipper truck moves loose bulk material and empties it by tipping the body, which is why it works wherever material is dug, hauled and dumped. One South African body builder lists its rigid tipper for construction, mining, agriculture and general haulage.[10]

Municipal documents show the everyday jobs. Dr JS Moroka Local Municipality's 2026/27 tariff rents out 6 cube and 10 cube tipper trucks by the hour, and Steve Tshwete Local Municipality's 2026/27 tariffs charge a property owner per 10 m³ truckload when the council clears building rubble or illegally dumped waste that the owner was instructed to clean and did not.[6][5]

A rigid tipper carries its tipping body on the truck's own chassis; one body builder lists a rigid rear-end tipper body of 21 m³. Trailer combinations are a different configuration. A 2015 trade analysis says two- and three-axle end-tipping semi-trailers cost less to buy than a side-tipping interlink, cost less to operate and maintain, and are much easier to manoeuvre and reverse, which suits them to building sites.[10][7][8]

The same analysis says the side-tipping interlink carries a bigger legal payload than those end-tippers, conforms to the bridge formula at 56,000 kg gross combination mass because its seven axles are well spread, and is only economical to run when fully loaded and working every working day. One body builder lists side tipper bins from 22 to 50 m³. Hiring one by the ton or the month is covered under side tipper hire.[8][9]

An articulated dumper is hired as a separate class of plant: the Cape Winelands District Municipality's 2025 plant tender lists articulated dumpers of 12 to 15 m³ as a category of their own, apart from its tipper trucks. To hire a tipper with a driver, see tipper truck hire.[3]

What size is a tipper truck, in cubes and tons?

Published South African documents describe a tipper in cubes, in tons or by its mass ratings, and rarely give all three together. These are the figures the sources state.[4][3][7]

What size is a tipper truck, in cubes and tons?
SizeConfigurationMass or payload statedSource
6 cubeNot statedTo carry (tip) a load of 6 to 8 tonsA municipal tender erratum, 2021
10 cube6x4, double differential, 210 kW engineDescribed as a 10 ton truckA municipal tender erratum, 2021
6x4 tipper chassis, body volume not stated6x4GVM 25,500 kg, tare 7,530 kg, permissible body plus payload 17,970 kgOne maker's South African sheet, September 2023
5, 8, 10, 17 and 22 cubeTipper trucks hired by the dayCapacity is the legal certified payload divided by 1,679 kg per m³, to the nearest cubic metreCape Winelands District Municipality tender, closing 19 March 2025

Sources:[4][7][3]

How many tons does a cube of material weigh?

A cube is a cubic metre, and the tons follow from the material, so there is no single cube-to-ton figure. The Cape Winelands tender fixes one convention for its own hire: a truck's capacity in cubes is its legal certified payload divided by 1,679 kg per cubic metre, rounded to the nearest cubic metre. A truck certified for 16,790 kg is a 10 cube truck, and so is one certified for 16,000 kg.[3]

For the weight of a cube of common materials, see the density table on tipper truck hire. Because the Cape Winelands figure is rounded to the nearest cubic metre, a truck's certified payload can be up to half a cube's worth, about 840 kg, less than its cube count times 1,679 kg.[3]

The body also takes weight. On one maker's sheet, a GVM of 25,500 kg less a tare of 7,530 kg leaves 17,970 kg for the body and the payload together, so every kilogram of body fitted comes off the load.[7]

What road rules apply to a tipper truck?

A tipper may not run above its mass limits. Regulation 239(1)(a) of the National Road Traffic Regulations, 2000 bars operating a goods vehicle on a public road if its gross vehicle mass or any gross axle massload is exceeded, and regulation 236 sets the permissible maximum vehicle mass, which "shall not exceed 56 000 kilograms".[1]

The load must stay on. Regulation 246(c) bars carrying goods that are not "safely contained within the body" or "securely fastened" and that are not "properly protected from being dislodged or spilled". The regulation does not name a tarpaulin or cover.[1]

The driver's licence follows the GVM: code C1 covers a goods vehicle above 3,500 kg up to 16,000 kg and code C one above 16,000 kg, in each case with or without a trailer of up to 750 kg; a heavier trailer needs an E code. The driver of a goods vehicle above 3,500 kg GVM must also hold a professional driving permit (regulation 115(1)(a)), subject to the exceptions in regulation 115(2).[2][1]

A worked example

Take 10 cubic metres of concrete sand at one UK reference's indicative 1,602 kg/m³: 10 times 1,602 is 16,020 kg. Under the Cape Winelands convention a truck rated at 10 cubes can be certified for anything from about 15,950 kg to about 17,630 kg, because the payload divided by 1,679 is rounded to the nearest cubic metre. A truck certified for 16,790 kg carries that sand with 770 kg to spare; one certified for 16,000 kg, also a 10 cube truck, would be 20 kg over its certified payload. The same 10 cubic metres of 38 to 63 mm crushed stone at the reference's indicative 1,483 kg/m³ weighs 14,830 kg, under either. The GVM and tare of the actual truck, not its cube count, decide what it may legally carry.[11][3][1]

Questions buyers ask

What does 10 cube mean on a tipper?

A 10 cube tipper is rated at 10 cubic metres of load. In the Cape Winelands District Municipality's 2025 tender that rating is the truck's legal certified payload divided by 1,679 kg per cubic metre, rounded to the nearest cubic metre, and where a larger body is fitted, "a permanent mark shall be made inside the body to indicate its volume".[3][4]

How many tons does a 10 cube tipper carry?

Sources give different figures. One municipal specification calls its 6x4 10 cube tipper a 10 ton truck, while under the Cape Winelands convention a 10 cube truck has a certified payload of roughly 15,950 to 17,630 kg. Ask for the certified payload of the truck being offered.[4][3]

Must a tipper load be covered?

Regulation 246(c) of the National Road Traffic Regulations, 2000 bars carrying goods that are not safely contained within the body or securely fastened to the vehicle and that are not properly protected from being dislodged or spilled. It does not name a tarpaulin or cover.[1]

Which licence does a tipper driver need?

The lowest licence code follows the GVM: C1 for a goods vehicle above 3,500 kg up to 16,000 kg and C above 16,000 kg, in each case with no trailer over 750 kg. A goods vehicle above 3,500 kg GVM also needs a driver with a professional driving permit, subject to the exceptions in regulation 115(2). A 6x4 tipper chassis rated at 25,500 kg GVM needs at least code C.[2][1][7]

Tell us what the tippers must move

Sources

  1. Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225): regulations 115, 236, 239 and 246, 17 March 2000.
  2. Department of Transport (Government Gazette 38142), Amendment of the National Road Traffic Regulations (GN R. 846): regulation 99 (licence codes), 31 October 2014.
  3. Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (specification, clause 3.2.3.4 and pricing schedules), Closing date 19 March 2025.
  4. Mogale City Local Municipality, Amendments made to tender for erratum (tender PWRT F 08 2021), including the specifications of the 6 cubic and 10 cubic metre tipper trucks, File dated 28 April 2021 (no date printed).
  5. Dr JS Moroka Local Municipality, Tariff structure 2026/2027, council resolution R472.05.2026: leasing and hiring of municipal equipment, rental of construction vehicles per hour, Resolution of 29 May 2026, 2026/27 financial year.
  6. Steve Tshwete Local Municipality, Schedule 2: approved sundry tariffs for the 2026/2027 financial year (VAT inclusive): area cleaning and disposal site tariffs, Effective 1 July 2026.
  7. Isuzu Trucks South Africa, Isuzu FXZ 26-360 tipper chassis specification sheet (6x4), September 2023.
  8. FOCUS on Transport, Side-tipping trailers get the tip?, 1 September 2015.
  9. SA Truck Bodies, Side Tipper (bin sizes 22 to 50 m³, payload and tare table), Updated 7 October 2026.
  10. SA Truck Bodies, Rigid Rear End Tipper (21 m³ rigid tipper), Updated 23 June 2026.
  11. Designing Buildings (the Construction Wiki, United Kingdom), Converting between weight and volume for bulk construction materials, Last edited 21 September 2026.