Hydraulic repair service: when to rebuild a cylinder, what the job includes and what the report must show
In short
A hydraulic repair service strips a cylinder and inspects each part for corrosion, scoring, taper, ovality and run-out. The workshop repairs or replaces what is worn, fits new seals and tests the assembly. A hose is made up new and pressure tested. Ask for the strip report and quote before work starts, and the test result and job card after.
What work do you need done?
Headcore7 min read10 sources
What does a hydraulic repair service do?
A hydraulic repair service rebuilds cylinders in a workshop and makes up replacement hose assemblies. South Africa's unit standard 244715, Repair a hydraulic cylinder, sets the order: prepare, strip, inspect the components, prepare them for assembly and assemble.[1]
Before stripping, the technician identifies the cylinder, removes pressure and oil and records its layout: port positions, mounting orientation and attachments. The operating environment is recorded too, including temperature, how aggressive the surroundings are and which fluid the seals must suit.[1]
The same unit standard requires the paperwork to be completed in line with workplace requirements. For where repairs sit beside planned inspections, see preventive maintenance; pumps are outside this page, and gearbox repair has its own.[1]
When is a hydraulic cylinder worth repairing instead of replacing?
The decision is made part by part once the cylinder is stripped, not before. The unit standard has each component inspected for corrosion, scoring, taper, ovality and run-out. The decision to repair or replace it follows its condition.[1]
Repairable components are sent for repair and replacements are ordered. Reworked or newly made parts must then be confirmed to be within acceptable tolerances before assembly.[1]
In practice, a workshop quotes only after the strip-down. One South African cylinder workshop publishes its order of work. A full strip and assessment comes first, then a damage report and repair quote, then grinding, honing, turning and repair.[8]
The same workshop keeps exchange cylinders to fit while a repair runs, so downtime need not follow the repair time. Ask whether an exchange unit is available before you decide.[8]
What does a hydraulic cylinder refurbishment include?
A cylinder refurbishment runs through seven steps, taken from South Africa's unit standards for cylinder and hydraulic component repair and one workshop's published process.[1][2][8]
| Step | What is done | What to ask to see |
|---|---|---|
| Identify and record | Cylinder identified from paperwork and markings; layout and operating conditions recorded | The recorded port positions and mounting orientation |
| Depressurise and strip | Pressure and oil removed; cylinder stripped, parts cleaned and stored | Notes on the parts as removed |
| Inspect | Each component checked for corrosion, scoring, taper, ovality and run-out | The strip report with measurements and a repair or replace decision per part |
| Repair or replace | Repairable parts reworked (honing, grinding, turning); others replaced | Which parts are new, reworked or reused |
| Seals and assembly | Seals sized and chosen for the fluid; cylinder assembled to the recorded layout | The seal kit used and the fluid it suits |
| Test | Static pressure test or dynamic test on test apparatus | The test pressure, duration and result |
| Paperwork | Job card, checklists and a report of the work completed | The job card and test report |
Should a repaired cylinder be pressure tested?
Ask for one, because the training standard allows other checks instead. South Africa's unit standard for earthmoving hydraulic components ends with quality checks after assembly: a dynamic test on test apparatus, working-condition checks that include static pressure tests, or a combination.[2]
The Pressure Equipment Regulations exclude cylinders that meet regulation 2(3)(d), so they set no test pressure for them. One South African workshop publishes a full leak test at 150% of design pressure, and issues a test certificate for repaired hydraulic components.[8][9][4]
Ask for the test pressure, the hold time and the result on the report. Compare the test pressure with the design pressure on the cylinder's nameplate or drawing.[2][8]
Which South African regulations apply to a repaired cylinder?
The Pressure Equipment Regulations do not. The Department of Labour's 2017 guidance notes say: "Hydraulic and pneumatic cylinders, or actuators meeting the requirements of PER 2(3)(d) are not regulated" (note (m) to regulation 2).[4]
Regulation 2(3)(d) excludes machinery whose design rests mainly on strength, rigidity and stability, where pressure is not a significant design factor. Its examples include pumps and actuating devices, so for a cylinder that meets regulation 2(3)(d) the regulations' approved inspection authority has no role in the repair.[4]
The Driven Machinery Regulations, 2015 apply to the repair, maintenance, inspection and testing of driven machinery (regulation 2). On a lifting machine, the user must record every modification or repair in a register kept on its premises (regulation 18(7)(a)).[5]
For leased lifting equipment, the owner and the lessor must keep full service history records for at least 10 years (regulation 18(7)(c)).[5]
On a construction site, the authorised operator must inspect mobile plant daily against a checklist (Construction Regulations, 2014, regulation 23(1)(k)). The findings go in a register kept in the machine.[6]
How is a hydraulic hose repaired?
In practice, a damaged hydraulic hose is replaced with a new hose assembly, made up and tested. South Africa's unit standard 244709, Make up hydraulic hose assemblies, has the hose chosen by reinforcement and application. The end fittings and collars must match it.[3]
The fittings may be crimped, field attachable or reusable, and skive or non-skive, and are attached to the fitting maker's specifications. The finished assembly is checked for length, orientation, dimensions and internal collapse.[3]
The unit standard then has the assembly "tested to the required pressure", cleaned, sealed and marked, and explains the marking in terms of traceability. Ask for the old hose's part number or a sample, the cut length and the test pressure.[3]
What drives the cost of a hydraulic cylinder repair?
The cost of a cylinder repair is set by what the strip-down finds: labour hours, new parts, machining, seals, the test and transport. A firm price comes with the damage report, after stripping.[8][1]
A public buyer can fix the terms in advance. Nelson Mandela Bay Stadium's request of 4 September 2026, for repairs to a cherry picker, a forklift and three vehicles, asked for a labour rate per hour and the mark-up on third-party quotes. It also required testing after repair and a warranty of at least six months.[7]
The same request wanted a job card per machine with the parts replaced and a labour cost breakdown. It also asked for a backup machine during repairs where required.[7]
One South African workshop states 2 to 8 weeks for standard hydraulic repairs. After a failure, ask for an oil sample too. ISO 4406:2021 codes the level of solid particles in hydraulic fluid, and its introduction says most component makers require a set level for warranty purposes.[9][10]
What to put in your request
- The machine and the cylinder or hose: make, model, part number, bore, rod diameter and stroke, or the hose's part number and length.[1][3]
- The fault you see, such as a leak, a damaged rod or a burst hose, with photographs.[1]
- The operating conditions: system pressure, temperature, environment and the hydraulic fluid used.[1]
- A strip report and quote before repair, with measurements and a repair or replace decision for each part.[1][8]
- A pressure test after repair, with the test pressure, hold time and result on the report.[2][8]
- A job card listing new, reworked and reused parts, labour hours and the labour rate.[7][2]
- The warranty period, the turnaround and whether an exchange unit is available.[7][8][9]
- Collection and delivery: who removes and refits the cylinder, and on site or in the workshop.[8]
- On a lifting machine: the repair details you need for the register under Driven Machinery Regulation 18(7)(a).[5]
Questions buyers ask
Does a repaired hydraulic cylinder need an AIA inspection?
No. The Department of Labour's guidance notes say hydraulic cylinders meeting regulation 2(3)(d) are not regulated by the Pressure Equipment Regulations. The in-service inspections those regulations require of pressure vessels therefore do not apply.[4]
Can a hydraulic hose be repaired on site?
South Africa's unit standard for hose work treats the job as making up a new assembly. Hose and fittings are matched, the fittings attached to the maker's specifications, and the assembly tested to the required pressure and marked. Ask for the same on site.[3]
What work do you need done?
Sources
- South African Qualifications Authority, Unit standard 244715: Repair a hydraulic cylinder, Registered 1 July 2018 to 30 June 2023; last date for achievement 30 June 2027.
- South African Qualifications Authority, Unit standard 15135: Repair and assemble earthmoving equipment hydraulic components, Registered 1 July 2018 to 30 June 2023; last date for achievement 30 June 2027.
- South African Qualifications Authority, Unit standard 244709: Make up hydraulic hose assemblies, Registered 1 July 2018 to 30 June 2023; last date for achievement 30 June 2027.
- Department of Labour (Government Gazette 41256), Guidance Notes to the Pressure Equipment Regulations, Revision 2 (GN 1265), with the text of each regulation, 17 November 2017.
- Department of Labour (Government Gazette 38905), Driven Machinery Regulations, 2015 (GN R. 540), 24 June 2015.
- Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84), 7 February 2014.
- Nelson Mandela Bay Stadium, RFQ NMBS099: full mechanical vehicles and machinery repairs and services, Requested 4 September 2026.
- Hytec Engineering (Bosch Rexroth Africa group), Hydraulic cylinder repairs, undated web page, read 15 November 2026.
- Bosch Rexroth Africa, Hydraulic repairs, undated web page, read 15 November 2026.
- International Organization for Standardization (preview hosted by iTeh Standards), ISO 4406:2021 (4th edition), Hydraulic fluid power: Fluids: Method for coding the level of contamination by solid particles (preview: foreword and introduction), January 2021.