Skip to content
Hiring contractors: rules and duties

Forklift certification cost in South Africa: course days, the 24-month licence and what the hirer must check

In short

Forklift certification in South Africa is priced by the training provider, per course or per day. One national provider's student price list, effective November 2026, charges R4,007.75 a day including VAT, with 5 days for a novice counterbalanced course and 1 day to recertify. The licence lasts up to 24 months, so the renewal is a recurring cost.

What work do you need done?

Headcore8 min read6 sources

Who may train and certify a forklift operator?

Only a training provider that is accredited and approved for the codes it teaches. Regulation 20 of the Driven Machinery Regulations lets the chief inspector approve and register a provider accredited by the Transport Education and Training Authority (TETA), on a certified copy of its accreditation letter.[1]

The notice that incorporated the 2024 Code accepts providers accredited by the Quality Council for Trades and Occupations (QCTO) or TETA until the end of June 2027. From then, all training providers must be accredited by the QCTO.[2]

Clause 6.1 of the Code bars a provider from training on any lifting machine code for which it does not hold accreditation and approval. Ask for the accreditation letter, the chief inspector's approval and the list of codes before booking.[2]

The first certificate of competence must show, among other items, the provider's accreditation number, the lifting machine code, attachments and capacity, any restrictions, the assessor's registration number and the skills programme number (clause 14.1). The SAQA unit standard for a counterbalanced lift truck, ID 242974, sits at NQF level 3 with 7 credits.[2][5]

What does forklift operator training cost in 2026?

In practice, the cost is set by each provider and moves with the number of training days. One national safety training provider's student course price list, version 2.5, effective November 2026, prices its lift truck courses at R4,007.75 per day, including VAT, in a classroom.[6]

The same list gives a counterbalanced lift truck course 5 days for a novice and 1 day for recertification, and a defined purpose lift truck course 3 days for a novice. The list charges that day rate for its rough terrain, telescopic boom handler and mobile crane courses.[6]

The list prints the lift truck price as a rate per day and does not say whether one day covers one learner or a group. Ask what a quoted day rate covers, and how many days the provider plans for your learners and codes.[6]

The other cost drivers come from the 2024 Code. A provider may train on your premises if enough equipment and facilities are available there (Appendix 2, note 3). Practical training may not exceed 4 learners per machine (clause 9.2(c)), so the number of trucks sets the length of the course.[2]

How long does forklift training take under the 2024 Code?

The 2024 Code sets the floor for re-licensing at 5 hours: at least 4 hours of theory and 1 hour of practical training. For a novice it sets no fixed hours; the course follows the notional hours of the skills programme, with a minimum of 30% theory and 70% practical.[2]

How long does forklift training take under the 2024 Code?
Rule in the 2024 CodeNovice learnerRe-licensing
Training timeThe notional learner hours of the skills programme, at least 30% theory and 70% practical (clause 9.2(a))At least 4 hours of theory and 1 hour of practical training (clause 11(a))
Learners per facilitator, theoryAt most 12 (clause 9.2(b))At most 12 (clause 11(c))
PracticalAt most 4 learners per machine, under direct facilitator supervision (clause 9.2(c))Assessment with 1 assessor per learner (clause 11(b))
What the learner bringsEmployer declaration or medical certificate of fitness, and an eye test result or a valid professional driving permit in its place (clause 12.2)The same documents (clause 12.2)

Sources:[2]

How long is a forklift certificate valid?

The licence or carry card is valid for up to 24 months and must show its date of issue and expiry date (clause 14.2 of the 2024 Code). The certificate of competence is issued once: clause 14.1 says no new certificate is issued on re-certification for the same skills programme.[2]

Re-licensing applies to operators whose licences have expired or are due to expire (clause 11(a)). An upgrade within the same type of machine, such as code F1 to F3, also counts as re-licensing (clause 11(d)).[2]

A new attachment means more training: where an operator needs additional or new attachments, the Code requires retraining and assessment that includes them. A temporary licence for practical experience lasts at most 6 months, under direct and constant supervision of a licensed operator (clause 10(c)).[2]

What must the hirer check when the forklift comes with an operator?

The hirer checks the operator's carry card, because the duty in regulation 18(11) sits with the user. The Occupational Health and Safety Act defines the user of machinery as the person who has "the right of control over the use" of it. The definition excludes a lessor (section 1).[1][3]

Check that the code, attachments and capacity on the card match the truck and the job, and that the expiry date falls after the hire. A card restricted under Appendix 2, note 9 of the Code, for example to loading and off-loading road vehicles only, does not cover other work.[2]

Section 37(2) of the Act makes the hirer answerable for the acts of a mandatary, which includes "a contractor or a subcontractor for work". The exception is where the parties "have agreed in writing to the arrangements and procedures between them to ensure compliance", so put those arrangements in writing with the hire company.[3]

On a construction site, regulation 23(1)(d) of the Construction Regulations, 2014 adds written authorisation to operate and a medical certificate of fitness from an occupational health practitioner, in the form of Annexure 3.[4]

What must the hirer supply when hiring without an operator?

A trained and licensed operator of its own, for the code of the hired truck. Section 8(2)(e) of the Occupational Health and Safety Act requires an employer to provide the information, instructions, training and supervision needed for health and safety, as far as reasonably practicable.[3][1]

Each learner must be at least 18 and physically able to do the work (clause 12.1 of the 2024 Code), and a new entrant must hold at least Grade 9, ABET 4 or NQF level 1 (clause 12.3). Before training starts, the learner gives the provider an employer declaration or medical certificate of fitness and an eye test result (clause 12.2).[2]

Appendix 4 of the Code places this duty on the chief executive officer, and says lifting machine operators must be informed about what they are allowed to do. Keep the cards and any written authorisations on file for the length of the hire.[2]

What to put in your request

  • The number of learners, the forklift codes needed (for example F1 for counterbalanced trucks up to 3,000 kg, F5 for reach trucks) and any attachments.[2]
  • Novice training or re-licensing, with the expiry date on each current carry card.[2]
  • Where the training happens; on your premises, the trucks, space and loads available, keeping to 4 learners per machine.[2]
  • Learners' age (18 or older), schooling, employer fitness declaration or medical certificate, and eye test result, ready before the first day.[2]
  • The provider's QCTO or TETA accreditation letter, the chief inspector's approval and the codes they cover.[1][2]
  • A price per learner or per day with the VAT basis, the number of days, and whether the assessment, certificate and carry card are included.[6]
  • What the certificate and card must show: code, attachments, capacity, restrictions, assessor registration number, skills programme number and expiry date.[2]
  • For a forklift hired with an operator: a copy of the operator's carry card, the written section 37(2) arrangements and, on a construction site, the written authorisation and Annexure 3 medical certificate.[3][4]

Questions buyers ask

Is a forklift licence the same as a driver's licence?

No. A forklift licence or carry card is issued by a licensing body approved by the Chief Inspector of the Department of Employment and Labour (clause 10(a) of the 2024 Code). The Code asks for an appropriate driver's licence only from new entrants on mobile jib cranes and tower cranes (clause 12.3(a)).[2]

Can a learner drive a forklift before qualifying?

Only with a temporary licence, valid for at most 6 months and issued for practical assessment or experience. The learner must work under direct and constant supervision of a person with a valid licence for that type of machine (clause 10(c)). The Code's notes add that an operator without a valid licence or temporary licence may not operate in the working environment.[2]

Does a forklift certificate carry over to a new employer?

That depends on the restrictions printed on it. Where the client only needs road vehicles loaded and off-loaded, Appendix 2, note 9 of the 2024 Code requires the certificate to be limited to "Whilst in the employment of the Client" or "For loading and off-loading road vehicles only". The Code prefers the second wording, because it still describes the operator's competence to another employer. Check the restrictions on the card.[2]

What work do you need done?

Sources

  1. Department of Labour (Government Gazette 38905), Driven Machinery Regulations, 2015 (GN R. 540), 24 June 2015.
  2. Department of Employment and Labour (Government Gazette 51711), Incorporation of the National Code of Practice for the Training Providers of Lifting Machine Operators, 2024, into the Driven Machinery Regulations 2015 (Notice 5526), 6 December 2024.
  3. Government Gazette 14918, Occupational Health and Safety Act 85 of 1993, 2 July 1993.
  4. Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84), 7 February 2014.
  5. South African Qualifications Authority, Unit standard 242974: Operate counter-balanced lift truck, Registration 1 July 2018 to 30 June 2023; last achievement 30 June 2032.
  6. NOSA, Student Course Pricelist 2026, version 2.5 (Driven Machinery Regulatory Training), Effective November 2026.