Telehandler hire or a forklift: reach, ground, attachments and what the hire must include
In short
Hire a telehandler when the load must go up and forward, over an obstacle or across rough ground; hire a forklift when it goes straight up from firm ground. A telehandler's capacity falls as the boom reaches out: one 3,500 kg machine lifts 1,150 kg at its 4 m outreach. The operator needs code C46, not a forklift code.
Tell us what plant you need
Headcore8 min read9 sources
What is the difference between a telehandler and a forklift?
A telehandler lifts on a telescopic boom that reaches forwards and upwards; a forklift lifts on a mast that goes straight up. Both are a line item in plant hire, and the telehandler glossary entry describes the machine itself.[2][6][7]
South African law treats them as different machines. The 2024 National Code of Practice for training providers of lifting machine operators lists forklifts under codes F1 to F16 and the telescopic boom handler under crane code C46.[2]
A rough-terrain forklift is a masted truck built for unpaved ground, with large pneumatic tyres and four-wheel drive. The Code lists counterbalanced lift trucks by capacity under F1 to F4, and rough terrain and agricultural equipment with lift truck attachments under F11.[7][2]
The safety standard for telehandlers on rough ground is ISO 10896-1:2020, which covers non-slewing rough-terrain variable-reach trucks with a rigid chassis. Industrial variable-reach trucks fall under ISO 3691-2 instead.[5]
Telehandler, rough-terrain forklift or warehouse forklift: which fits the site?
One maker's technical sheets, published by its South African dealer, show the trade-off. The rough-terrain forklift carries the most, 5,000 kg; the warehouse forklift the least, 3,000 kg, with 200 mm under its middle against the telehandler's 360 mm.[7][6][8]
| Example machine | Rated load | Lift | Drive wheels | Ground clearance | Width and mass |
|---|---|---|---|---|---|
| Rough-terrain masted forklift | 5,000 kg at a 600 mm load centre | Straight up on the mast | 4 | 375 mm at the centre of the wheelbase | 2,080 mm wide; 7,660 kg in service |
| Compact telehandler | 3,500 kg, falling with reach | 6.90 m up or 4 m forward | 4 | 360 mm | 2.26 m wide; 6,970 kg unladen with forks |
| Diesel warehouse forklift | 3,000 kg at a 500 mm load centre | Straight up on the mast | 2 | 200 mm at the centre of the wheelbase, 130 mm under the mast | 1,225 mm wide; 4,610 kg in service |
When is a telehandler the better choice?
In practice, a telehandler earns its hire when the load has to travel forward as well as up: onto a roof or slab edge, over a trench, into the back of a high trailer or across a wall. A forklift's mast can only lift what the truck can drive right up to.[6][9]
Ground is the second test. A dealer's 2025 telehandler guide recommends agricultural tyres for soft fields and industrial tyres for hard yards and concrete, and the warehouse forklift in the table drives on 2 wheels with 130 mm under its mast.[9][8]
Attachments decide the rest. A dealer's guide lists pallet forks, buckets, grapples, bale clamps and big bag handlers for farm telehandlers, and the 2024 Code's attachment letters include a crane hook and a mancage. Each attachment has its own load chart, and in South Africa some change the legal status of the lift.[9][1][2]
How does reach reduce a telehandler's capacity?
Capacity falls as the boom extends forward. One maker's chart for a 3,500 kg telehandler on its tyres with forks shows the full 3,500 kg only close to the machine. At its maximum 4 m outreach it lifts 1,150 kg, about a third of the rated load.[6]
In South Africa, regulation 18(1)(b) of the Driven Machinery Regulations, 2015 requires the safe working load to be clearly marked. Where it varies with the conditions of use, "a table showing the safe working load with regard to every variable condition" must be posted where the operator can easily see it.[1]
So the hire question is not the rated load on the brochure. It is the load at the reach and height of the actual lift, read off the chart for the attachment that will be fitted.[6][1]
Can a telehandler lift people?
Only in a man-cage. Regulation 18(8) of the Driven Machinery Regulations lets a lifting machine move or support a person only when it is "fitted with a man-cage designed and manufactured according to an approved SANS standard approved for that purpose by an inspector". A risk assessment must be done first.[1]
Check that the operator's card lists the man-cage: the 2024 Code's attachment letters for crane codes include T for a mancage, and clause 14.2 has the carry card show the attachments the operator is licensed for.[2]
On a construction site, regulation 10 of the Construction Regulations, 2014 requires the contractor to have a competent person prepare a fall protection plan, with a risk assessment of all work from a fall risk position. Where people, not loads, go up, a cherry picker hire may be the simpler machine.[3]
Who may operate a telehandler on a South African site?
An operator trained and licensed for code C46. Regulation 18(11) of the Driven Machinery Regulations requires every lifting machine to be operated by an operator "specifically trained for that particular type of lifting machine", so a forklift card alone does not cover a telehandler.[1][2]
The carry card is valid for up to 24 months and shows the code, the attachments, the capacity and any restrictions (clause 14.2 of the 2024 Code). The forklift operator certificate guide covers training and renewal.[2]
On a construction site, regulation 23(1)(d) of the Construction Regulations adds written authorisation and a medical certificate of fitness in the form of Annexure 3. Regulation 23(1)(k) requires the operator to inspect the machine daily against a checklist and record the findings in a register kept in it.[3]
With a hook or jib, the telehandler lifts a suspended load. Its slings and shackles are lifting tackle, which regulation 18(10)(e) has a competent person examine at intervals not exceeding three months.[1]
What should a telehandler hire quote include?
A telehandler hire quote should name the machine's rated load, lift height and outreach, the attachments with their load charts, and the inspection records the hirer must keep as the user of a leased lifting machine.[1][6]
Regulation 18(5)(a) requires an examination and performance test by a lifting machinery inspector of a lifting machinery entity at intervals not exceeding 12 months. Regulation 18(7)(b) makes the user of a leased lifting machine keep the latest test and service records, not older than 12 months, on its premises.[1]
The hirer is the user: the Occupational Health and Safety Act defines the user of machinery as the person with "the right of control over the use" of it, not the lessor (section 1). Section 37(2) holds the hirer answerable for a contractor's acts unless the two have agreed in writing on the arrangements and procedures for compliance.[4]
Delivery is its own line: the compact telehandler in the table weighs 6,970 kg unladen with forks. On a public road, mobile plant must comply with the National Road Traffic Act, 1996 (Construction Regulations, regulation 23(2)(j)).[6][3]
What to put in your request
- The heaviest load in kg and its size, the height it must reach, and how far forward of where the machine can stand it must be placed.[6][1]
- The ground: concrete, compacted gravel, soft soil or slopes, and the narrowest gate or access route.[9][8]
- The attachments: forks, bucket, jib or hook, or a man-cage, each with the load chart that applies to it.[1][9]
- If people will be lifted: a man-cage to an approved SANS standard approved by an inspector, the risk assessment and, on a construction site, the fall protection plan.[1][3]
- With or without an operator; if with, a carry card showing code C46, the attachments and an expiry date after the hire.[2]
- The latest examination and performance test by a lifting machinery entity, not older than 12 months, and the service records for your register.[1]
- Hire period and start date, with delivery and collection priced as separate lines.[6][3]
- The written arrangements under section 37(2) of the Occupational Health and Safety Act.[4]
Questions buyers ask
Can a telehandler replace a crane?
For light lifts within its chart, sometimes: with a hook or jib it lifts suspended loads, and the slings and shackles then need a competent person's examination at least every three months (regulation 18(10)(e)). The 2024 Code keeps separate codes for mobile cranes, such as C43 for hydraulic mobile cranes up to 15,000 kg, and heavier lifts belong with mobile crane hire.[1][2]
Does a rough-terrain forklift need a different licence from a warehouse forklift?
Check the code on the card against the machine. The 2024 Code lists counterbalanced lift trucks by capacity under F1 to F4 and rough terrain and agricultural equipment with lift truck attachments under F11, and regulation 18(11) requires training for that particular type of lifting machine.[2][1]
Can a telehandler drive on a public road to the site?
Mobile plant travelling or working on a public road must comply with the National Road Traffic Act, 1996 (Construction Regulations, 2014, regulation 23(2)(j)). ISO 10896-1:2020, the safety standard for rough-terrain variable-reach trucks, does not address the hazards of use on public roads, so ask the hire company how the machine will reach the site.[3][5]
Tell us what plant you need
Sources
- Department of Labour (Government Gazette 38905), Driven Machinery Regulations, 2015 (GN R. 540), 24 June 2015.
- Department of Employment and Labour (Government Gazette 51711), Incorporation of the National Code of Practice for the Training Providers of Lifting Machine Operators, 2024, into the Driven Machinery Regulations 2015 (Notice 5526), 6 December 2024.
- Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84), 7 February 2014.
- Government Gazette 14918, Occupational Health and Safety Act 85 of 1993, 2 July 1993.
- ISO, ISO 10896-1:2020, Rough-terrain trucks: Safety requirements and verification, Part 1: Variable-reach trucks (edition 2), April 2020.
- Manitou (via Manitou Centre SA), MT-X 735 technical sheet and load chart (machine on tyres with forks), Created 8 June 2026.
- Manitou (via Manitou Centre SA), M-X 50-4 rough-terrain forklift technical sheet, Created 3 January 2025.
- Manitou (via Manitou Centre SA), MI-X 30 D diesel forklift technical sheet, Created 7 January 2025.
- Manitou Centre SA, Guide to Choosing the Right Telehandler for South African Farming, 2025.