What is a scaffold tag, and what do green, yellow and red mean?
Scaffold tag: a sign at a scaffold's access points showing whether it has been inspected and may be used; South African sources name the green tag, and the colours beyond it are site practice.[4][6][9]
Also called Green tag, Scaffold safety tag, Safe for use tag
- The Construction Regulations, 2014 never use the word tag: they require the inspection, recorded in a register on site. The tag and its colours are site practice.
- Only green appears in South African public-sector documents: the SAQA inspector unit standard lists it, and a Reserve Bank tender specification admits access only while it is displayed.
- Yellow is not one meaning: a South African contractor reads it as restricted use, a United States shipyard sample tag as use with a safety harness. Ask for the legend in writing.
Need one?Scaffolding hirePlant hire
Headcore10 sources
Tell us what scaffolding you need
What is a scaffold tag in South Africa?
A scaffold tag is the sign on a scaffold that tells workers whether it has been inspected and may be used. The SAQA unit standard for scaffold inspectors lists the green tag, with access scaffolding inspection registers and handover certificates, among the documentation and signage an inspector explains according to SANS 10085 and workplace procedures.[4][9]
It hangs where people get on. A South African scaffolding contractor's guidance says tags must be attached at all access points to the scaffold and must be current, and the Reserve Bank's 2021 specification permits access only through the official access installed.[9][6]
The tag is one part of the paper trail. The National Department of Health's 2025 scope of works says the health and safety file handed over at completion typically contains scaffolding tags, and Rustenburg Local Municipality's 2025 inspection list carries a line for safe or unsafe for use signs under its access or system, free-standing and mobile scaffolding entries.[8][7]
The scaffold inspection and tagging guide explains who inspects and how the register and handover certificate work; this page covers the tag itself. For the scaffold behind it, see scaffolding hire.[4]
What do the green, yellow and red scaffold tags mean?
The colour code is practice. These are the readings found: a South African scaffolding contractor's 2026 guidance, a Reserve Bank tender specification and a sample tag set in a United States Department of Labor shipyard guide. Where they differ, ask for the site's own legend in writing.[9][6][10]
| Tag state | What it means | Who may use the scaffold |
|---|---|---|
| Green | Inspected and safe for use (South African contractor); a sample legend reads that the scaffold was built to meet safety regulations | Workers may ascend; the Reserve Bank specification allows access only while the green tag is displayed |
| Yellow | Caution, restricted use (South African contractor); a sample legend reads that the scaffold does not meet safety regulations and a safety harness must be used | Entry only with specific authorisation (South African contractor); with a harness (sample legend) |
| Red | Do not use, unsafe (South African contractor); a sample legend reads that the scaffold is not complete and must not be used | Nobody: access prohibited until re-inspected and cleared (South African contractor); do not use (sample legend) |
| Green tag out of date | Out of date: the inspection interval is no longer current (South African contractor) | Not authorised: an out-of-date green tag does not authorise use (South African contractor) |
What does a scaffold tag record?
In practice, no South African source read for this page prescribes the fields on a tag. The sample tags in a United States Department of Labor shipyard guide each carry a space for a dated authorised signature, and the fourth reads "Pre-shift Inspection Required Before Use".[10]
The detail sits in the written inspection record. A South African contractor lists its minimum contents as when the inspection took place, the competent person's name and qualifications, the scaffold's location, type and height, findings and corrective actions, whether the scaffold is safe to use, and the competent person's signature.[9]
The unit standards sort access scaffolding platforms into very light, light, medium and heavy classes by their loading limitations, and expect the inspector to calculate the safe working loads on platforms from the drawings and specifications. No source read says the class goes on the tag, so ask the scaffolding company to state it on the tag or the handover certificate, and the next inspection date in the register.[4][5]
Is a scaffold tag required by law in South Africa?
The Construction Regulations, 2014 do not require a tag by name. What they require is the inspection. Scaffolds are temporary works under regulation 1, and regulation 12(3)(f) makes the contractor ensure that "all temporary works structures are inspected by a competent person immediately before, during and after the placement of concrete, after inclement weather or any other imposed load and at least on a daily basis until the temporary works structure has been removed and the results have been recorded in a register and made available on site".[1]
Regulation 12(3)(h) adds that a structure found "damaged or weakened to such a degree that its integrity is affected" must be "safely removed or reinforced immediately". Regulation 16(1) makes the contractor appoint a competent person in writing to ensure scaffold inspectors are competent, and regulation 16(2) requires access scaffolding in use to comply with the incorporated safety standards.[1]
Regulation 16 sets no inspection interval. Weekly intervals come from contracts: Rustenburg Local Municipality's 2025 tender asks for scaffolding to be inspected weekly and after inclement weather, and the National Department of Health's 2025 scope of works asks for all scaffolding to be inspected weekly by a scaffold inspector. A weekly interval is less frequent than the daily minimum in regulation 12(3)(f). The 2017 guidelines say scaffolds must comply with SANS 10085, and the SAQA inspector unit standard explains the green tag according to SANS 10085 and workplace procedures.[1][7][8][2][4]
The draft Construction Regulations published for comment on 12 March 2025 had not been made final by November 2026. Their draft regulation 16 would keep only the duty to comply with the incorporated standard, so the 2014 text above still applies.[3]
A worked example
For illustration: a scaffold carries a green tag, but the register's last entry is on Tuesday and it is now Thursday morning. Regulation 12(3)(f) asks for an inspection at least on a daily basis, recorded in a register, so Wednesday's inspection is missing from the record. A South African contractor's guidance says an out-of-date green tag does not authorise use, and the Reserve Bank's specification admits access only while the green tag is displayed; on that reading the crew waits for the competent person to inspect and record it before climbing.[1][9][6]
Questions buyers ask
Is a scaffold tag a legal requirement?
Not by name. The Construction Regulations, 2014 require a competent person's inspection at least daily, recorded in a register on site (regulation 12(3)(f)), and do not mention tags. The SAQA inspector unit standard explains the green tag according to SANS 10085 and workplace procedures, and contracts add their own rules: the Reserve Bank's 2021 specification allows access only while the green tag is displayed.[1][4][6]
Who signs a scaffold tag?
No South African source read says who signs the tag. The inspector unit standard has the register and handover certificate completed after inspection and re-inspection, issued and signed off, and a sample tag in a United States Department of Labor shipyard guide has a space for a dated authorised signature.[4][10]
Can I use a scaffold with no tag?
Treat it as not cleared. The Reserve Bank's 2021 specification says an erected scaffold may only be accessed when the green tag is displayed. Ask the competent person to inspect it and show the register entry first.[6][1]
What does a yellow scaffold tag mean?
It differs by source. A South African contractor reads yellow as caution, restricted use, with entry only on specific authorisation. A United States Department of Labor sample tag reads it as a scaffold that does not meet safety regulations, to be used with a safety harness. Get the site's legend in writing.[9][10]
Tell us what scaffolding you need
Sources
- Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R. 84), 7 February 2014.
- Department of Labour (Government Gazette 40883), Construction Regulations, 2014: Guidelines (GN 489), 2 June 2017.
- Department of Employment and Labour (Government Gazette 52267), Draft Construction Regulations: invitation of public comments (GN 5983), 12 March 2025.
- South African Qualifications Authority, Unit standard 263205: Inspect access scaffolding, Registered 1 July 2018 to 30 June 2023; last date for enrolment 30 June 2028.
- South African Qualifications Authority, Unit standard 263245: Erect, use and dismantle access scaffolding, Registered 1 July 2018 to 30 June 2023; last date for enrolment 30 June 2029.
- South African Reserve Bank, Annexure K1: Construction health and safety tender specification, GW176 SARB head office extension (demolitions), Revision December 2021.
- Rustenburg Local Municipality, Contract RLM/DCD/0027/2025/26: repairs and maintenance of municipal buildings and facilities for 36 months (bills and health and safety specification), Closing date 15 December 2025.
- National Department of Health, Scope of works NDoHF03-2025/2026: fabrication and erection of a steel water tank at Dysselsdorp Clinic, Last amended 9 December 2025.
- Pro Rise Scaffolding, Scaffolding inspection requirements every South African site manager needs to know, 17 August 2026.
- United States Department of Labor, Occupational Safety and Health Administration, eTool: Shipyard Employment, hanging staging (marine), sample scaffold tagging program, undated, read November 2026.