Skip to content

What is a bulldozer, and what size do you need?

Bulldozer: a tractor, most often on tracks, with a blade at the front that pushes, cuts and grades soil, sand, rubble or rock as it drives forward; a rear ripper is its most popular accessory.[8][7]

Also called Dozer, Crawler dozer, Track-type tractor, Crawler tractor

  • A bulldozer, or dozer, pushes material with a blade on the front of a tractor that most often runs on tracks, and a ripper at the rear loosens hard ground. One maker's 2025 South African guide lists 12 tracked models from 9,740 kg with a 2.2 m³ blade to 112,100 kg with a 27.2 m³ blade.
  • The blade decides the work: a straight blade for fine grading, a universal blade to carry a large load, a semi-U blade for pushing large rocks. Two municipalities sought a dozer for landfill sites, and one asked for it with an operator at a wet rate, priced per hour and per 8 hours.
  • On a construction site the contractor must ensure the operator is trained, certified competent, authorised in writing and medically fit. On a mine the machine is a trackless mobile machine, and the employer's procedures must issue its operator a licence.

Need one?Bulldozer hire: classes and ratesPlant hire

Headcore9 sources

What work do you need done?

What does a bulldozer do, and where is it used?

A bulldozer pushes material with a blade. ISO 20474-2:2017 defines a dozer as a "self-propelled crawler or wheeled machine with equipment having either dozing attachment which cuts, moves, and grades material through forward motion of the machine or a mounted attachment used to exert a push or a pull force". A general reference describes the usual machine as a large tractor on tracks with a metal blade, used in road building, construction, mining, forestry and land clearing.[7][8]

The blade comes in several shapes. A straight blade is short, with no lateral curve or side wings, and can be used for fine grading. A universal blade is tall and very curved, with large side wings that maximise the load. A semi-U, or combination, blade is shorter with less curvature and smaller side wings, and is typically used for pushing large rocks, as at a quarry. A blade can also be set straight across the frame or at an angle.[8]

A ripper, a long claw-like shank mounted singly or in multiples at the rear of the machine, loosens hard and impacted material. One maker's 2025 guide lists a multi-shank ripper on five of its seven small to medium models and a giant single-shank ripper on all five of its large ones.[8][3]

Two municipal notices seek a dozer for landfill work. Swellendam Municipality's quotation notice SMQ64-25-26 asked for quotations for the "hiring of bulldozer for Suurbraak & Barrydale landfill sites for a 1 year period on an ad-hoc basis", with documents available from 26 March 2026 and a closing time of 11h00 on 2 April 2026. Kumnkani Mhlontlo Local Municipality's bid HSWM/COMM/MHLM2024-25 lists a dozer of one named reference model "or equivalent", with a driver or operator, "to be used at landfill site when there is a need", priced per hour and per 8 hours excluding VAT, and states that "The rate must be a wet rate".[6][4]

The same Mhlontlo bid lists a TLB, a 20 ton track excavator, a 32 ton landfill compactor and a grader as separate items, each with a driver or operator, and appoints service providers per item, with at most four items each.[4]

What size of bulldozer do I need?

One maker's 2025 South African product guide lists 12 tracked dozers, in two tables headed small to medium and large, and 2 wheel dozers; across the range, operating weight, engine power and blade capacity rise broadly together. This page splits the guide's small to medium table at 20,000 kg, and the guide notes under that table that operating weight is approximate.[3]

What size of bulldozer do I need?
ClassOperating weightEngine net powerBlade capacityBlade widthRipper listed
Small to medium, under 20,000 kg (3 models)9,740 to 19,610 kg79 to 125 kW2.2 to 3.4 m³2,710 to 3,250 mmMulti shank, all three
Small to medium, over 20,000 kg (4 models)20,850 to 28,060 kg153 to 197 kW3.7 to 7.0 m³3,460 to 4,365 mmMulti shank on two; none listed on the two with 910 and 940 mm grouser shoes
Large (5 models)39,700 to 112,100 kg264 to 664 kW9.4 to 27.2 m³4,060 to 5,430 mmGiant single shank, all five
Wheel dozers (2 models)48,100 and 100,000 kg393 and 637 kW8.0 and 26.0 m³5,100 and 6,470 mmNo ripper row in the guide's table

Sources:[3]

What should a bulldozer hire request specify?

A hire request names the work and the machine class, because blade capacity and operating weight differ more than tenfold across the range above. The two municipal notices show the wording: Swellendam named the two landfill sites and asked for hire ad hoc over one year, and Mhlontlo asked for a dozer of a named reference model or equivalent, with its driver or operator, to be used at the landfill site when there is a need, priced per hour and per 8 hours excluding VAT.[6][4][3]

A district tender sets the classes by weight and power. Cape Winelands District Municipality's plant hire tender T 2025/015, which closed on 19 March 2025, asked for "crawler tractors: complete with angle dozer blade, ripper and operator" in four classes: 12 tonnes (75 to 100 kW), 18 to 23 tonnes (110 to 180 kW), 23 to 30 tonnes (160 to 200 kW) and 30 to 55 tonnes (200 to 370 kW). It split each class by year of manufacture.[5]

The guide prints a blade type for each model: power angle tilt on the three smallest, semi-U tilt on two of the others in its small to medium table, and a strengthened blade on all five large ones. A wheel dozer in the same guide is a different machine: two models, with a straight blade on the smaller one and a semi-U blade on the larger. For other plant hire see plant hire. Drawing on those notices, a dozer request can name:[3][4][6]

  • the work, for example landfill work, land clearing or pushing rock, and the site;[6][4][8]
  • the class by operating weight and engine power, as the Cape Winelands tender does, or a reference model with the words "or equivalent", as the Mhlontlo bid does;[5][4][3]
  • the blade type and whether a ripper is needed;[8][3]
  • a wet rate with the operator, priced per hour or per 8 hours, and the VAT basis, as the Mhlontlo bid sets them out;[4]
  • the period and call-out basis, such as ad hoc over one year or as and when required;[6][4]
  • the operator's proof of competency, written authorisation and medical certificate of fitness.[1]

What rules apply to a bulldozer on a South African site or mine?

On a construction site, a dozer is mobile plant under the Construction Regulations, 2014 (GN R. 84), defined as "any machinery, appliance or other similar device that is able to move independently, and is used for the purpose of performing construction work on a construction site". Under regulation 23(1)(d) the contractor must ensure the operator "has received appropriate training, is certified competent and in possession of proof of competency and is authorised in writing", and has a medical certificate of fitness issued by an occupational health practitioner in the form of Annexure 3.[1]

The contractor must also ensure that the machine has a structure protecting the operator from falling material or from being crushed if it overturns, an acoustic warning device and an automatic acoustic reversing alarm, and that the authorised operator inspects it daily before use against a checklist, with the findings recorded in a register kept in the machine (regulation 23(1)(h) to (k)). The contractor must prevent it falling into excavations, water or any other area lower than the working surface by installing adequate edge protection (regulation 23(1)(g)), and when it is not in use, buckets, booms or similar appendages must be fully lowered or blocked, controls in a neutral position, motors stopped, wheels chocked, brakes set and ignition secured (regulation 23(2)(f)). Its text is current: the 2025 draft construction regulations are not final.[1]

On a mine, regulation 8.10 of the Mine Health and Safety Regulations (GN R. 125 of 27 February 2015) defines a trackless mobile machine as a self-propelled machine used for mining, transport or associated operations underground or on surface at a mine and "mobile by virtue of its movement on wheels, skids, tracks, mechanical shoes or any other device fitted to the machine", which takes in a tracked dozer used at a mine. The employer must take reasonably practicable measures to ensure that its procedures have operators assessed as competent by a competent person, authorised in writing by the responsible engineer and by their supervisor, and issued a licence showing at least a photograph, the machine types they may operate, the dates of issue and expiry and their company identification number (8.10.23). The operator must carry the originally issued licence while operating (8.10.27).[2]

Regulation 8.10 also requires the employer to take reasonably practicable measures for roll-over and falling-object protection where the mine's risk assessment calls for it (8.10.4 and 8.10.5), pre-use checklists completed by operators at the beginning of their shift (8.10.24.2) and the prevention of any trackless mobile machine reversing over the edge of a stockpile or dump (8.10.25).[2]

A worked example

A buyer pushing 300 m³ of loose cover material into place can compare blade volumes from the 2025 guide. Counting only full blades of the printed capacity, a 3.4 m³ blade needs 89 passes (300 divided by 3.4 is 88.2), a 7.0 m³ blade needs 43 and a 9.4 m³ blade needs 32. The guide gives no fill factor or push distance for its dozers, so this counts blades, not hours. The request should state the volume, the push distance and the material, and ask the supplier to state the hours its machine needs.[3]

Questions buyers ask

What is the difference between a bulldozer and a grader?

A dozer pushes material with a blade at the front of a tracked tractor. A grader carries its blade between the front and rear axles and is used to finish grade. In one 2025 South African guide a grader's blade is 3,710 to 5,490 mm long and the machine travels at up to 47.9 km/h forward, on tyres, against 2,710 to 5,430 mm blades on the tracked dozers.[9][8][3]

What is a wheel dozer?

A wheel dozer is an all-wheel-drive dozer, which ISO 20474-2 covers beside the crawler type. One maker's 2025 South African guide lists two: 48,100 kg with a 393 kW engine and a straight 8.0 m³ blade, and 100,000 kg with a 637 kW engine and a semi-U 26.0 m³ blade. Both are at the heavy end of the tracked range.[7][8][3]

What does the ripper on a bulldozer do?

The ripper is a long, claw-like shank mounted at the rear, singly or in multiples, that loosens hard and impacted material. One maker's 2025 guide lists a multi-shank ripper on five of its seven small to medium dozers and a giant single shank on all five large ones. A hire request says whether a ripper is wanted, since not every model is listed with one.[8][3]

Does a bulldozer operator need a licence in South Africa?

On a construction site, regulation 23(1)(d) of the Construction Regulations, 2014 asks for training, proof of competency, written authorisation and a medical certificate of fitness. On a mine, regulation 8.10.23 of the Mine Health and Safety Regulations requires assessment, written authorisation and a licence that the operator carries (8.10.27).[1][2]

What work do you need done?

Sources

  1. Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84): regulations 1 and 23, 7 February 2014.
  2. Department of Mineral Resources (Government Gazette 38493), Mine Health and Safety Act, 1996: Regulations relating to machinery and equipment (GN R. 125), regulation 8.10 Trackless mobile machinery, 27 February 2015.
  3. Komatsu South Africa (Pty) Ltd, Product guide, Southern Africa (dozers, wheel dozers and motor graders), September 2025.
  4. Kumnkani Mhlontlo Local Municipality, Bid HSWM/COMM/MHLM2024-25: panel of four service providers for hiring specialised waste management vehicles, equipment and support services, 36 months, Advertised 4 December 2024; closing 24 January 2025.
  5. Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (specification and pricing schedules), Closing date 19 March 2025.
  6. Swellendam Municipality (quotation notice T36/2026, on eTenders), Quotation SMQ64-25-26: hiring of bulldozer for Suurbraak & Barrydale landfill sites for a 1 year period on an ad-hoc basis, Documents from 26 March 2026; closing 2 April 2026.
  7. ISO, ISO 20474-2:2017, Earth-moving machinery: Safety, Part 2: Requirements for dozers (preview: scope and definitions), July 2017 (second edition).
  8. Wikipedia, Bulldozer, Last edited 29 October 2026.
  9. Wikipedia, Grader, Last edited 31 July 2026.