What is a plate compactor, and which size do you need?
Plate compactor: a walk-behind machine with a vibrating base plate, usually driven by a petrol or diesel engine, that compacts granular soil, gravel and asphalt in thin layers.[6][7][10][9]
Also called Vibrating plate, Vibratory plate, Wacker plate, Tamper
- A plate compactor works by vibration and weight, so it suits granular soil, gravel and asphalt. In a narrow trench in clay or silt, a rammer is the usual tool instead.
- One maker's range runs from a 55.8 kg forward plate with 8.4 kN of centrifugal force to a 436 kg reversible plate with 52 kN. Another maker says the choice of plate depends on the required compaction depth, or centrifugal force.
- An Eastern Cape specification for on-farm infrastructure limits trench backfill layers to 150 mm after compaction, at 90% to 98% of modified AASHTO density. The 2024 noise and vibration regulations set the employer's duties for the operator's exposure.
Need one?Compactor hire: plate or rammerPlant hire
Headcore13 sources
What work do you need done?
What is a plate compactor and how does it differ from a rammer or a roller?
A plate compactor is a walk-behind machine with a large base plate that is vibrated by rapidly rotating eccentric masses. One equipment rental guide says plates "combine weight and vibration to lock granular soils", and that they cover more area per pass than rammers and excel on graded, level surfaces.[10][7][9]
In smaller plates the vibration tends to move the machine forward, and some larger plates are given a directional control. One maker describes its reversible series as suited to soil in open areas and within trenches. Another maker's current forward range lists petrol, diesel and battery models, and its reversible range lists petrol and diesel.[10][8][6][7]
A rammer has a smaller foot, driven up and down by its engine. The same rental guide says rammers suit cohesive or semi-cohesive soils such as silt and clay, and that their vertical design fits trenches and tight spaces. Rollers are used to compact crushed rock as the base layer under concrete or stone foundations or slabs, and a padfoot roller is the roller type for cohesive soils such as clay; this page is about the plate.[10][9][13]
"Wacker plate", or just "wacker", is a name for a plate compactor taken from the name of one well-known maker; Wikipedia says it is commonly used in England. In a request or a tender, write "plate compactor" and give the type and weight instead, so the quote is for the machine you need and not for a brand.[10]
Engine choice matters in a trench. The UK's Health and Safety Executive (HSE) lists using petrol-powered equipment indoors or in enclosed spaces, including trenches and excavations, as a carbon monoxide risk: even a few minutes can create levels that kill, and specially selected mechanical extraction that vents outside will almost always be needed. It advises using safer alternatives, such as electrical tools, where you can. One maker describes its battery plates as great for confined spaces and emission-controlled zones.[11][6]
What size of plate compactor do I need?
The rows below are three published ranges from two makers, as the makers list them: a worked sample, not a standard size class. One maker says the choice of plate depends on the required compaction depth, or centrifugal force, but neither gives a compaction depth for any model, so ask the hire company for the depth stated for the model it offers.[6][7][8]
| Range | Weight | Plate width | Centrifugal force | Stated use |
|---|---|---|---|---|
| One maker's forward plates | 55.8 to 135 kg | 320 to 500 mm | 8.4 to 20 kN | Silt and gravel; asphalt repair, with a non-stick plate and water tank; the battery models for confined spaces, small and medium repair and maintenance work, and landscaping and hardscaping |
| The same maker's reversible plates | 157 to 436 kg | 450 to 650 mm | 28 to 52 kN | Granular soils, gravel and rockfill; from light, nimble plates for smaller repair jobs to diesel heavy plates for thick layers of rockfill on large infrastructure projects |
| A second maker's reversible series, described by the maker as medium-weight and heavy-duty | 360 to 743 kg | 590 to 750 mm | 55 to 100 kN | Soil in road and civil engineering, across open areas and within trenches |
How thick a layer can a plate compactor compact, and to what density?
One South African specification sets a limit for trench backfill. The Eastern Cape Department of Rural Development and Agrarian Reform's specification for agricultural on-farm infrastructure (third edition, April 2024) says each trench is backfilled in layers of thickness (after compaction) that do not exceed 150 mm, and lists SANS 2001-DP1, the earthworks standard for buried pipelines, among the standards it refers to.[4]
The density target depends on the traffic. Outside traffic loads the specification asks for the density of the undisturbed surrounding ground or 90% of modified AASHTO maximum dry density, whichever is higher. Under road traffic loads it asks for 93% in cohesive soil and 98% in non-cohesive soil. These are that specification's requirements for its own works, so read the specification for your job.[4]
The same specification adds a note for walk-behind rollers: it is extremely difficult to compact a layer over 100 mm to the required density with them, so a 150 mm layer should be compacted as two 75 mm layers. The note is about rollers, not plates, so ask for the compaction depth the maker states for the plate offered.[4]
Next to a pipe, hand tools come first. A 2002 Telkom specification for underground telephone plant says machine compaction shall not be used directly above the pipe, and that padding next to and between the pipes is compacted only by hand with a tamping tool until the pipes are covered, after which a vibratory plate compactor is used. That is one utility's rule, not a regulation.[5]
A hire request should state the soil (granular or cohesive), the trench width and depth, the layer thickness and density the specification asks for, who tests the density, and whether a reversible plate is needed. One equipment rental guide advises compacting in thin, even layers, and says multiple passes on a thin lift are more effective than one pass on a thick layer.[4][9]
What noise and vibration rules apply to a plate compactor in South Africa?
The Physical Agents Regulations, 2024 cover hand-arm vibration. Regulation 13(1) requires the employer to eliminate hand-arm vibration at the source where reasonably practicable. Table 1 sets the action level at 2,5 m/s² and the occupational exposure limit at 5 m/s², both as an 8-hour average.[1]
At or above the exposure limit, regulation 13(3) requires the employer, as a minimum, to implement alternative working methods, install plant designed to produce the least possible vibration, keep the plant maintained, and limit the duration and magnitude of exposure. Regulation 5 makes the supplier of plant provide information to minimise the risk of exposure.[1]
The Noise Exposure Regulations, 2024 set a noise-rating limit of 85 dBA as an 8-hour rating level, or a peak of 137 dBC for impulse noise, and a noise action level of 82 dBA. Regulation 11 requires a noise zone to be demarcated at or above the rating limit, and plant without a fixed location counts. Where it is not reasonably practicable to eliminate or control an employee's exposure, regulation 12 requires the employer to provide suitable hearing protective devices.[2]
Both notices were published in Government Gazette 52226 on 6 March 2025. Regulation 18 of the Noise Exposure Regulations says the Noise-Induced Hearing Loss Regulations, 2003 (GN R. 307 of 7 March 2003) will be repealed 18 months after the date of promulgation of the Noise Exposure Regulations.[2]
On a construction site, regulation 13(2)(d) of the Construction Regulations, 2014 requires a contractor who performs excavation work to ensure that no load, material, plant or equipment is placed or moved near the edge of an excavation where it may cause its collapse and so endanger anyone, unless precautions such as sufficient and suitable shoring or bracing are taken to prevent the sides from collapsing. That covers a plate compactor working along a trench edge.[3]
A worked example
A service trench in an area under road traffic loads is backfilled with 0.9 m of non-cohesive sand above the padding. Under that specification, layers of at most 150 mm after compaction mean at least 900 / 150 = 6 layers, each compacted to 98% of modified AASHTO maximum dry density. If the plate on site can only compact a 75 mm layer to that density, as the specification's note says of walk-behind rollers, the same trench needs 900 / 75 = 12 layers. Outside traffic loads, the same backfill needs the surrounding ground's density or 90%, whichever is higher.[4]
Questions buyers ask
Is a wacker plate the same as a plate compactor?
Yes. "Wacker plate" is a name for a plate compactor taken from one maker's name, and Wikipedia says it is commonly used that way in England. Ask for the type, forward or reversible, and the weight, because the name alone does not tell the hire company which size you need.[10][7]
Should I use a plate compactor or a rammer in a trench?
It depends on the soil. One equipment rental guide says rammers suit cohesive or semi-cohesive soils such as silt and clay and fit trenches and tight spaces, while plates lock granular soils and cover more area on level surfaces. One maker describes its reversible plates as suited to soil in open areas and within trenches.[9][8]
Can I run a petrol plate compactor in a trench?
Only with the exhaust risk dealt with. The UK's Health and Safety Executive lists petrol-powered equipment used in enclosed spaces, including trenches and excavations, as a carbon monoxide risk: even a few minutes can create levels that kill, and specially selected mechanical extraction that vents outside will almost always be needed. It advises using safer alternatives, such as electrical tools, where you can.[11]
How much vibration does a plate compactor produce?
The UK Health and Safety Executive's recommended initial value is 18 m/s² for a plate compactor without vibration reduction (range 9 to 22) and 4 m/s² for a vibration-reduced one (range 2 to 7). South Africa's action level is 2,5 m/s² and its exposure limit 5 m/s² over 8 hours, so operating time matters.[12][1]
What does the operator have to be given?
Where it is not reasonably practicable to eliminate or control noise exposure, the employer must provide suitable hearing protective devices (Noise Exposure Regulations, regulation 12). Regulation 6 of the same regulations requires a supplier of plant or machinery to give the employer or user its noise and vibration emission data, so ask the hire company for it.[2]
What work do you need done?
Sources
- Department of Employment and Labour (Government Gazette 52226), Physical Agents Regulations, 2024 (Notice 5952), 6 March 2025.
- Department of Employment and Labour (Government Gazette 52226), Noise Exposure Regulations, 2024 (Notice 5953), 6 March 2025.
- Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R. 84), 7 February 2014.
- Department of Rural Development and Agrarian Reform, Eastern Cape (Directorate Engineering Services), DRDAR SCMM-03/2024: Specification of construction materials and methods to be used for agricultural on-farm infrastructure, Third edition, April 2024 (file posted April 2026).
- Telkom SA, Telkom Specification 325 R: Specification for civil engineering works associated with the installation of underground telephone plant (Issue 1), Implementation date 1 July 2002; marked for Telkom use only, copy hosted by IMESA.
- Husqvarna Construction, Forward plate compactors (product range), Undated product page, read November 2026.
- Husqvarna Construction, Reversible plate compactors (product range), Undated product page, read November 2026.
- Weber Maschinentechnik, Reversible plates CR 6 to CR 9: overview, Last updated 18 November 2026 (page footer).
- Cat Rental Store (Caterpillar), Light compactors: types, uses, and how to choose, Undated blog page; copyright 2026.
- Wikipedia, Compactor (redirected from "Plate compactor"), Last edited 24 March 2026.
- Health and Safety Executive (UK), Construction hazardous substances: carbon monoxide, 7 November 2024.
- Health and Safety Executive (UK), Vibration risk assessment, 8 July 2025.
- Wirtgen Group, Soil compaction (earthworks applications), Read 15 November 2026.