Skip to content

What is a roller compactor, and which type of roller do you need?

Roller compactor: a self-propelled or walk-behind machine with heavy steel drums or rubber tyres that compacts soil, gravel and asphalt by its weight, with or without vibration.[10][9]

Also called Road roller, Compaction roller, Vibratory roller, Soil compactor

  • Rollers differ by what touches the ground: a smooth steel drum, a padfoot drum, or pneumatic tyres, on a ride-on, walk-behind or trench machine. The material and the layer decide which one.
  • A roller maker says cohesive soils suit padfoot drums at high amplitude, and non-cohesive soils suit smooth drums at lower amplitude. Static rollers compact by pressure alone; vibratory rollers add vibration.
  • A Western Cape tender asked for flat steel wheel rollers of 10 to 20 ton, vibrating rollers of 10 to 25 ton, pneumatic rollers of 15 to 28 ton and padfoot rollers of 10 to 18 ton, each with an operator.

Need one?TLB hire with an operatorPlant hire

Headcore16 sources

What work do you need done?

What is the difference between a static and a vibratory roller compactor?

A static roller compacts by its weight alone; a vibratory roller adds vibration. Wikipedia says rollers use the weight of the vehicle to compress the surface being rolled (static), or use mechanical advantage (vibrating). A New Zealand forest road manual says powered static rollers compact material by pressure only, and that compaction in granular soils is best achieved by vibration.[10][9]

A roller maker names three factors that set the intensity of compaction: the displacement of the drum, that is the amplitude of the vibration or oscillation; its frequency; and the application time, that is the roller's travel speed. It says that when they are correctly defined the compaction required can be achieved in considerably fewer passes. The forest road manual says heavier rollers with high amplitude and relatively low frequency, 200 to 1,800 vibrations per minute, can compact very thick lifts in some granular materials, and that with less weight, lower amplitudes and generally higher frequencies a reduced layer thickness can be compacted.[8][9]

One maker's data sheets show the spread. A soil compactor with a padfoot drum is listed at 27 or 37 Hz with an amplitude of 1.90 or 0.80 mm; a small tandem roller of 2,695 kg is listed at 65 or 51 Hz with 0.45 mm.[15][13]

In a request, say whether the roller must be vibratory, and ask for the amplitude and frequency settings the hire company states for the machine, since both change with the model.[15][13][8]

What types of roller compactor are there and what do they weigh?

The rows are published figures from one maker's range, one published comparison and one municipal tender's classes: a worked sample, not a standard size class. The padfoot roller has its own page, linked under terms used.[13][14][16][15][12][7]

What types of roller compactor are there and what do they weigh?
TypePublished figuresWhat the sources say it is for
Single smooth drum, vibratory, ride-onA 2023 comparison of 62 smooth-drum soil compactor models from seven makers lists drum widths of 47 to 84 in and operating weights of 7,165 to 57,056 lb (converted here: about 1,194 to 2,134 mm and 3,250 to 25,880 kg)A New Zealand forest road manual says a large steel drum vibratory roller is often considered the best for general purpose use, and that smooth-wheeled rollers are used for crushed rock, gravels, sands and other granular materials
Padfoot drum, ride-onOne maker's padfoot compactor: 10,890 kg with cab, drum 2,140 mm wide; tender classes 10 to 18 tonCohesive soils such as clay and silt
Tandem, two smooth drumsOne maker's tandem roller: 2,695 kg with ROPS, 3,410 kg maximum, two smooth drums each 1,200 mm wide; tender classes for flat steel wheel tandem and 3-wheel rollers 10 to 20 tonAsphalt, in a general reference's description: Wikipedia says a wear course is compacted with a tandem smooth drum roller, a three-point roller or a pneumatic tyre roller, and that tandem vibrating rollers are the usual choice now
Pneumatic-tyredOne maker's pneumatic-tyre roller: 9,480 kg with cab, 27,950 kg maximum operating weight; eight 11.00-R20 tyres; working width 2,084 mm; tender classes 15 to 28 tonTwo overlapping rows of tyres whose flexibility gives a kneading action that seals the surface, in Wikipedia's description; a New Zealand forest road manual says its performance is a function of tyre pressure, tyre contact area and weight
Walk-behind, single or double drumWikipedia lists a light single-drum and a heavy double-drum walk-behind roller; the sources read give no weight for a powered oneA New Zealand forest road manual puts hand-operated single drum vibratory rollers at granular layers up to 120 mm compacted, in four to six passes; an Eastern Cape specification says a layer over 100 mm is extremely difficult to compact to the required density with walk-behind rollers
Trench roller, remote-controlledOne maker's trench roller: 1,456 kg maximum operating weight, two padfoot drums 820 mm wideTrench work; Wikipedia captions a trench roller as operated by remote control for operator safety

Sources:[12][9][15][13][14][16][7][10][11][4][8]

Which roller suits which layer: base, asphalt or cohesive fill?

The material decides first. A roller maker says "Cohesive soils are best compacted using compactors with padfoot drums and high amplitudes", while "non-cohesive soils are more effectively compacted with smooth drums and lower amplitudes". Wikipedia describes the usual order on a soil base: a padfoot drum first, then a single smooth drum compactor that compacts the high spots down until the soil is smooth.[8][10]

South African road guidance names rollers for particular jobs. The CSIR settlement guidelines say only pneumatic tyred rollers should be used when rolling surfacing stone made from weaker aggregates. For gravel wearing course material from basic igneous rocks, they say the cobbles and boulders must be removed, generally by hand, because a grid roller will not break them down. When an existing street is upgraded, they say impact roller compaction can usually compact the in-situ material to a depth of 600 mm. For a layer, they say standard practice is to roll to refusal density based on proof rolling of a short section, and that hand-held rollers may be inadequate to achieve the required density.[5][6]

Ask the engineer which specification governs the job and put its roller, layer and density clauses in the request, with who tests the density.[5]

One public buyer's tender shows rollers hired by type and mass; rates, wet and dry hire and transport are in the article on road-building plant.[7]

What rules apply to a roller compactor on a South African site?

Regulation 1 of the Construction Regulations, 2014 defines mobile plant as machinery "able to move independently" and used for construction work on a construction site, which covers a ride-on roller. Regulation 23(1)(d) requires its operator to have received appropriate training, be certified competent with proof of competency, be authorised in writing, and hold a medical certificate of fitness in the form of Annexure 3.[1]

On a public road, regulation 23(2)(j) requires the roller to comply with the National Road Traffic Act, 1996.[1]

A ride-on roller exposes its operator to whole-body vibration and noise, which the Physical Agents Regulations, 2024 and the Noise Exposure Regulations, 2024 limit; the supplier must give the noise and vibration emission data under regulation 6(1)(d) of the latter.[2][3]

A worked example

One maker's padfoot soil compactor vibrates at 27 or 37 Hz, which its data sheet also gives as 1,620 or 2,220 vibrations per minute (27 x 60 = 1,620; 37 x 60 = 2,220). The same maker's small tandem roller runs at 65 Hz, or 65 x 60 = 3,900 a minute, at 0.45 mm amplitude. A New Zealand forest road manual puts heavy, high-amplitude rollers at 200 to 1,800 vibrations per minute, so only the soil compactor's first setting falls in that band; the manual says lower amplitudes and higher frequencies compact a reduced layer thickness.[15][13][9]

Questions buyers ask

Is a vibratory roller the same as a smooth drum roller?

Not always. Smooth drum describes the surface of the drum; vibratory describes whether it vibrates. A tandem roller can have two smooth vibrating drums, as in one maker's small tandem roller, and a padfoot drum can vibrate too. Ask for both the drum type and whether vibration is fitted.[13][15][10]

Can I use a plate compactor instead of a roller?

For small areas, often yes. A New Zealand forest road manual calls vibrating plate compactors ideal for small areas, at compacted layers of 75 to 110 mm. On a specified layer the density decides: the CSIR guidelines warn hand-held rollers may be inadequate to achieve the required density, and an Eastern Cape specification says a layer over 100 mm is extremely difficult to compact to density with walk-behind rollers.[9][5][4]

Which roller finishes asphalt?

A general reference, Wikipedia, says a wear course is compacted with a tandem smooth drum roller, a three-point roller or a pneumatic tyre roller, and that tandem vibrating rollers are the usual choice now. It says the flexible tyres of a pneumatic roller give a kneading action that seals the surface.[10]

What does a roller quote need to say?

The type and mass class, whether vibratory, with or without an operator, and the year of manufacture, since the Cape Winelands tender asked each class to be priced with a wet rate and a standby rate and asked each machine's year of manufacture. State the layer, the density asked and who tests it.[7][5]

What work do you need done?

Sources

  1. Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R. 84): regulations 1 and 23, 7 February 2014.
  2. Department of Employment and Labour (Government Gazette 52226), Physical Agents Regulations, 2024 (Notice 5952): Table 1, 6 March 2025.
  3. Department of Employment and Labour (Government Gazette 52226), Noise Exposure Regulations, 2024 (Notice 5953): regulation 6 and the noise-rating limit, 6 March 2025.
  4. Department of Rural Development and Agrarian Reform, Eastern Cape (Directorate Engineering Services), DRDAR SCMM-03/2024: Specification of construction materials and methods to be used for agricultural on-farm infrastructure (clause 2.16, compaction of trench backfill), Third edition, April 2024 (file posted April 2026).
  5. CSIR (for the Department of Housing), Guidelines for Human Settlement Planning and Design, Volume 2, Chapter 8: Roads: materials and construction, PDF of 22 October 2009.
  6. CSIR (for the Department of Housing), Guidelines for Human Settlement Planning and Design, Volume 2, Chapter 8: Roads: materials and construction (pages 41 to 80: unpaved streets, surfacings and upgrading), PDF of 22 October 2009.
  7. Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (specification and pricing schedules), Closing date 19 March 2025.
  8. Wirtgen Group, Soil compaction (earthworks applications), Read 19 November 2026.
  9. New Zealand Forest Owners Association, NZ Forest Road Engineering Manual, 6.6 Compaction equipment, Undated page, copyright 2026, read 19 November 2026.
  10. Wikipedia, Road roller, Last edited 20 October 2026.
  11. Wikipedia, Compactor, Last edited 24 March 2026.
  12. Dozr, The Ultimate Soil Compactor Spec Guide (smooth drum soil compactor specs, 62 models), 7 March 2023.
  13. Hamm AG (Wirtgen Group), HD 12 VV (H230): tandem roller with two vibrating roller drums, technical data, Datasheet, copyright 2023.
  14. Hamm AG (Wirtgen Group), HP 280 (H249): pneumatic-tyre roller, technical data, Datasheet, copyright 2026 (V12), read 19 November 2026.
  15. Hamm AG (Wirtgen Group), 3410 P (H217): compactor with padfoot drum, technical data, Datasheet, copyright 2023 (V5), read 19 November 2026.
  16. Hamm AG (Wirtgen Group), Trench roller with two vibration padfoot drums HTC 15 (technical data), Undated product page, read 19 November 2026.