What is an articulated dump truck, and which payload class do you need?
Articulated dump truck: a three-axle off-road truck with a tipping body that steers by bending at a central joint, drives all its wheels and hauls loose material over soft, steep or rutted ground.[8][9][7]
Also called Articulated dumper, Articulated hauler, ADT truck
- An articulated dump truck bends at a central joint to steer and drives all its wheels. One maker's South African booklet and a second maker's brochure give payloads from 27.3 t with a 16.6 m³ heaped body to 45.4 t with 27.5 m³.
- Makers describe it for soft, muddy and steep haul roads, and it is narrower than one maker's mechanical-drive trucks, which carry more per truck. It is still wider than the 2.6 m that regulation 223(b) allows a goods vehicle of 12,000 kg GVM or more on a public road.
- On a mine it is a trackless mobile machine under regulation 8.10 of the Mine Health and Safety Regulations; on a construction site, regulation 23 of the Construction Regulations applies.
Need one?TLB hire with an operatorPlant hire
Headcore11 sources
What work do you need done?
What is an articulated dump truck, and how does it steer?
An articulated dump truck is a tipping hauler built as a front and a rear frame joined at an articulation joint, with one axle ahead of the joint and two behind it. One maker's 40 t truck steers with two hydraulic cylinders through an articulation angle of 45 degrees each way, and a second maker's range quotes 42 degrees.[8][9]
It has three axles and drives them all. The 40 t truck's brochure gives full-time all-wheel drive and puts 56.7 per cent of its weight on the front axle when empty and about 29, 35 and 35 per cent on the three axles when loaded. The second maker's brochure labels its trucks 6X6 in its performance charts, and its inter-axle diff-lock engages automatically when conditions deteriorate.[8][9]
Makers present it for poor ground. One maker's traction control is described as allowing easy travel on soft ground and slippery roads, a second maker says its trucks, with an oscillating frame and high-flotation tyres, won't leave you stuck in muddy, rutted or hilly terrain, and the first maker's South African page describes automatic retarders that handle steep downhill haul roads even when fully loaded.[8][9][7]
A mechanical-drive dump truck carries more: one maker's South African range has mechanical-drive trucks of 36.5 t to 139 t and electric-drive mining trucks of up to 363 t, against 27.3 t to 45.4 t for the articulated trucks below. A tipper truck is the road-going relative, sized in cubes. The same maker's booklet matches its articulated trucks to an excavator, a wheel loader or a shovel by the number of bucket passes.[5][9][10]
What payload class do I need?
Articulated dump trucks are sized by rated payload and heaped body volume. The figures come from one maker's South African range booklet and trucks page, a second maker's brochure and a municipal tender, with makers left unnamed. Every truck in the table with a width stated is wider than 2.6 m, the overall width that regulation 223(b) of the National Road Traffic Regulations, 2000 allows a goods vehicle of 12,000 kg gross vehicle mass or more on a public road.[5][6][9][10][4]
| Payload class | Heaped body | Empty and loaded mass, width | Use the maker or buyer states for the range | Source |
|---|---|---|---|---|
| 27.3 t | 16.6 m³ | 24,040 kg empty, 51,420 kg gross; 2,900 mm overall width | Construction, mining and quarry | One maker's South African booklet, 2025, and its trucks page |
| 40 t | 24 m³ | 33,925 kg empty, 74,000 kg gross; 3,450 mm overall width | Construction, mining and quarry | The same booklet and trucks page |
| 39 t | 24 m³ | 34,596 kg empty, 73,596 kg loaded; 3,487 to 3,656 mm over tyres | Muddy, rutted or hilly terrain | A second maker's brochure, May 2024 |
| 41 t | 25 m³ | 35,479 kg empty, 76,479 kg loaded | Muddy, rutted or hilly terrain | The second maker's brochure |
| 45.4 t | 27.5 m³ | 38,287 kg empty, 83,687 kg loaded; 3,714 to 3,832 mm over tyres | Muddy, rutted or hilly terrain | The second maker's brochure |
| 18 t, 20 t, and 22 t and larger (rate columns) | 12 to 15 m³ | Not stated | Municipal plant hire, a rate per day with fuel, oil and operator | A district municipality's 2025 plant tender |
When does an articulated dump truck beat a mechanical-drive truck?
Makers present the articulated truck for poor ground and steep grades, with all-wheel drive, traction control and retarders for soft, muddy and steep haul roads. In the table above it is 2,900 to 3,450 mm wide overall in one maker's range and up to 3,832 mm over the tyres in a second maker's, against an overall width of 4,525 mm and more for the first maker's mechanical-drive trucks.[8][7][9][5]
A mechanical-drive truck carries more: one maker's mechanical-drive range rises to 139 t of payload, against 45.4 t at the top of the articulated trucks here. The same maker's booklet matches each truck to excavators, wheel loaders and shovels by the number of bucket passes, so the loading tool and the truck are chosen together.[5][9]
In practice, a request for an articulated dump truck can name:[10][1][3]
- the payload class or body volume, in tonnes or heaped cubic metres, and the material it will carry;[5][10][11]
- the haul road: its ground, gradient and width;[7][8]
- whether the rate covers fuel, oil and operator and is per day, as one district municipality's 2025 tender asks, with a tachograph fitted; for hire with an operator, see plant hire;[10]
- the operator's proof of competency and written authorisation, and on a mine the operator's licence for that machine type.[1][3]
What rules apply to an articulated dump truck in South Africa?
On a mine, regulation 8.10 of the Mine Health and Safety Regulations, inserted by GN R. 125 of 27 February 2015 under the Mine Health and Safety Act, 1996 (Act 29 of 1996), treats the truck as a "trackless mobile machine", a self-propelled machine used for "mining, transport or associated operations underground or on surface at a mine".[1]
Its operators must be assessed as competent, authorised in writing by the responsible engineer and by their supervisor, and issued a licence with a photograph, the machine types allowed and issue and expiry dates, which they must carry (8.10.23 and 8.10.27). The truck needs a pre-use checklist completed every shift (8.10.24.2), measures against reversing over the edge of a stockpile or dump (8.10.25) and roll-over protection where the risk assessment requires it (8.10.4).[1]
At an opencast or open pit mine with a significant risk of collisions between diesel machines, every diesel-powered trackless mobile machine, this truck included, must detect another one nearby and warn both operators, and, if nobody acts, slow and brake automatically (8.10.2.1). Sub-regulation 8.10.2.1(b), the automatic slowing and braking, came into operation on 21 December 2022, the date Notice 2908 was published in Government Gazette 47790.[1][2]
On a construction site, regulation 23(1)(d) of the Construction Regulations, 2014 (GN R. 84) requires an operator who "has received appropriate training, is certified competent and in possession of proof of competency and is authorised in writing", with a medical certificate of fitness. Regulation 23(1)(h), (j) and (k) adds overturn protection, a reversing alarm and a daily checklist inspection recorded in a register.[3]
On a public road, regulation 223(b) of the National Road Traffic Regulations, 2000 bars a goods vehicle of 12,000 kg gross vehicle mass or more if its overall width exceeds 2.6 m. How a machine wider than 2.6 m moves by road is covered under lowbed trailer.[4]
A worked example
A job moves 480 m³ of loose concrete sand, at one UK reference's indicative 1,602 kg/m³, which is 768,960 kg. A 24 m³ heaped body (the 40 t class) holds 38,448 kg of it, under the 40 t payload, so the job takes 480 divided by 24, 20 loads. A 16.6 m³ body (the 27.3 t class) holds 26,593 kg, under 27.3 t, so it takes 480 divided by 16.6, which is 28.9, so 29 loads. The larger class saves nine loads on this job. Both figures treat the sand as loose and the body as heaped, so a real count depends on how the material is loaded.[5][11]
Questions buyers ask
How much does an articulated dump truck carry?
One maker's South African booklet and a second maker's brochure give payloads from 27.3 t in a 16.6 m³ heaped body to 45.4 t in a 27.5 m³ body, with the 40 t class at 24 m³. The booklet notes that a nominal payload must be adjusted if a customised body or different tyres change the truck's weight.[5][9]
What is the difference between articulated and mechanical-drive dump trucks?
An articulated truck bends at a central joint and drives all its wheels, and the trucks in the table above are 2,900 to 3,450 mm wide overall or up to 3,832 mm over the tyres. One maker's mechanical-drive trucks are 4,525 mm wide overall or more and carry from 36.5 t. See dump truck.[8][5][9]
What is an ADT truck?
ADT is the short form one maker's South African page uses for articulated dump trucks, so an ADT truck is the hinged, all-wheel-drive hauler described above. A second maker's brochure labels its trucks 6X6 in its performance charts and gives final drives on all three axles.[7][9][8]
Can an articulated dump truck drive on a public road?
Not as it stands. Regulation 223(b) of the National Road Traffic Regulations bars a goods vehicle of 12,000 kg GVM or more from a public road if it is wider than 2.6 m, and the trucks in the table above with a width stated are 2,900 mm wide or more. How a wider machine moves by road is covered under lowbed trailer.[4][5][9]
What work do you need done?
Sources
- Department of Mineral Resources (Government Gazette 38493), Mine Health and Safety Act, 1996: Regulations relating to machinery and equipment (GN R. 125), regulation 8.10 Trackless mobile machinery, 27 February 2015.
- Department of Mineral Resources and Energy (Government Gazette 47790), Mine Health and Safety Act, 1996: Commencement of the regulations relating to trackless mobile machinery (Notice 2908), 21 December 2022.
- Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84), regulation 23, 7 February 2014.
- Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225): regulation 223, 17 March 2000.
- Komatsu South Africa, Komatsu Southern Africa product line-ups booklet 2025: mechanical and electric trucks, 2025.
- Komatsu (South African site), Trucks: construction, mining and quarry, Read 19 November 2026.
- Komatsu (South African site), Articulated trucks: articulated dump trucks (ADTs), Read 19 November 2026.
- Komatsu Ltd (Japan), Articulated dump truck HM400-3R, March 2022.
- Bell Equipment, E-series B40E, B45E and B50E articulated dump trucks brochure, May 2024 (Stage IIIA edition, Australian dealer copy).
- Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (category 20, articulated dump trucks), Closing date 19 March 2025.
- Designing Buildings (the Construction Wiki, United Kingdom), Converting between weight and volume for bulk construction materials, Last edited 21 September 2026.