What is lifting tackle, and how often must it be inspected?
Lifting tackle: the slings, shackles, hooks, eye bolts, spreader beams and other items South African regulations list for attaching a load to a lifting machine, which a competent person must examine at least every three months.[1]
Also called Lifting gear, Slings and shackles, Rigging gear
- The Driven Machinery Regulations, 2015 (GN R. 540) list what counts as tackle, from chain, wire rope and webbing slings to plate and drum lifting clamps. Regulation 18(10) sets what a user must do before using any of it.
- Tackle is examined by a competent person the user appoints in writing, at intervals not exceeding three months, who records and signs the result. A lifting machinery inspector's yearly test of the crane itself excludes tackle.
- A buyer hiring a crane should ask who supplies the slings and shackles, whether each assembly carries its identification and safe working load, and the date of the last signed examination.
Need one?Crane hire and crane trucksPlant hire
Headcore6 sources
Tell us about the lift
What counts as lifting tackle in South Africa?
Regulation 1 of the Driven Machinery Regulations, 2015 (GN R. 540) defines lifting tackle as "chain slings, wire rope slings, woven webbing slings, master links, hooks, shackles and swivels, eye bolts, lifting or spreader beams, tongs, ladles, coil lifters, plate lifting clamps and drum lifting clamps used to attach a load to a lifting machine".[1]
The definition names its items one by one, and round slings are not among them. The Department of Labour's guidelines (GN R. 288 of 2017) add a note that coil lifters are found in the steel industry, for lifting hot rolled steel products. Ask the person who examines your tackle how a type the definition does not name is treated.[1][3]
The same item can fall under two rules. A hook or attaching device that forms an integral part of the crane itself is examined with the machine's ropes, chains, sheaves, brakes and safety devices by a competent person at intervals not exceeding six months (regulation 18(6)). The same kind of hook in a sling assembly is tackle, with its own three-month interval.[1]
Tackle is not covered by the yearly test of the crane. Regulation 18(5)(a) has the lifting machinery inspector examine and performance-test the installation and its ancillary lifting equipment "excluding lifting tackle". See safe working load for how the rating itself is set.[1]
How is each kind of lifting tackle rated, marked and inspected?
Regulation 18(10) puts one set of duties on every item of tackle and adds a factor of safety only for ropes, chains and woven webbing. The table follows the regulation, with practice guidance where the regulation is silent.[1]
| Item | Factor of safety | How the SWL is marked | Inspection duty | Source |
|---|---|---|---|---|
| Steel chain sling | Five for steel chain, four for high-tensile or alloy steel chain | The lifting assembly carries traceable identification particulars and the safe working load it is designed to lift; a Working Load Limit marking is also acceptable | Examined at intervals not exceeding three months by an appointed competent person, who records and signs the result | Regulation 18(10)(b), (c), (e); GN R. 288 note to 18(10) |
| Wire rope sling | Six for steel-wire rope; at least eight for double-part spliced endless sling legs and double-part endless grommet sling legs | As for a chain sling: the assembly carries traceable identification and the safe working load | Every three months, by an appointed competent person | Regulation 18(10)(b), (c), (e) |
| Woven webbing sling | Seven for woven webbing | As for a chain sling: the assembly carries traceable identification and the safe working load | Every three months, by an appointed competent person | Regulation 18(10)(b), (c), (e) |
| Master links, hooks, shackles and swivels, eye bolts | None set: the regulation requires sound material, enough strength, freedom from defects and a generally accepted technical standard | No separate marking in regulation 18(10)(b), which marks the assembly. UK guidance, which is not South African law, says a lifting accessory with one SWL should carry it, or a coding system where marking is not possible | Every three months, by an appointed competent person | Regulation 18(10)(a), (e); UK HSE L113 |
| Lifting or spreader beams, tongs, ladles, coil lifters, plate and drum lifting clamps | None set: the same four requirements of regulation 18(10)(a) apply | The assembly it forms part of is marked with identification and the safe working load | Every three months, by an appointed competent person | Regulation 18(10)(a), (b), (e) |
Who may examine lifting tackle, and what must they do?
A competent person the user appoints in writing. Regulation 18(10)(e) requires lifting tackle to be examined "at intervals not exceeding three months by a competent person, appointed by the user in writing for this purpose, who shall record and sign results of such examination". This lifting tackle inspection does not need a lifting machinery inspector; the lifting machinery inspector page explains what that role signs.[1]
A competent person is defined as one who has, for the work or task, the required knowledge, training and experience and, where applicable, qualifications, and who is familiar with the Act and the applicable regulations. That wording is from the correction notice GN R. 913 of 2 October 2015, which corrected the definition as first published.[2]
Regulation 18(10)(d) adds a duty on the user: all tackle is inspected and discarded if it shows any sign of damage, defect, wear or distortion that would make it unsafe for use, as per the manufacturer's specification. The guidelines note that equal load sharing is not always possible, so the person doing the work must allow for unequal loading in determining the capacity.[1][3]
GN R. 542 of 2015 incorporated SANS 2972, on lifting tackle inspection, into the regulations, and GN R. 483 of 11 May 2018 removed it from the schedule. Regulation 18(10) itself names no standard for the examination.[5][6]
The register that regulation 18(7)(a) requires records the examinations under subregulations (5) and (6), which are the machine's. The tackle record is the one regulation 18(10)(e) makes the competent person write and sign.[1]
What should a buyer hiring a crane ask about lifting tackle?
Who supplies it, and who is the user under regulation 18(10). Settle both in writing when you ask for crane hire, because no user may use or allow the use of tackle that fails regulation 18(10). A load chart covers the crane, not the sling.[1]
In practice, put these questions in the request:[1]
- The date of the last signed three-month examination of each sling and shackle, and the name of the appointed competent person.[1]
- The identification particulars and the safe working load marked on each lifting assembly, matched to the heaviest lift in the scope.[1]
- The sling configuration, because two or more legs sharing a load change the capacity; see how the angle cuts the rating in safe working load.[1][3]
- That items showing damage, defect, wear or distortion that would make them unsafe are discarded, as regulation 18(10)(d) requires, and replaced with tackle that has a signed examination record.[1]
A worked example
A crane hire runs from 1 December 2026 to 28 February 2027. The hire firm's slings were last examined and signed for on 10 September 2026, so the next examination is due by 10 December 2026, nine days into the hire. The buyer asks for the examination to be repeated and signed before 10 December, or for tackle examined more recently. A single-leg steel wire rope sling marked 5 t safe working load needs a factor of safety of six with respect to that load, so its rope must have a breaking strength of at least 6 × 5 = 30 t (a double-part endless or grommet sling leg would need eight).[1]
Questions buyers ask
How often must lifting tackle be inspected in South Africa?
At intervals not exceeding three months, by a competent person the user appoints in writing, who records and signs the result (Driven Machinery Regulations, regulation 18(10)(e)). Items that show any damage, defect, wear or distortion that would make them unsafe are discarded (regulation 18(10)(d)).[1]
Does a lifting machinery inspector have to examine slings and shackles?
No. Regulation 18(5)(a) requires a lifting machinery inspector for the lifting machine and its ancillary equipment, "excluding lifting tackle". A competent person appointed in writing examines the tackle.[1]
Is a shackle lifting tackle?
Yes. Regulation 1 names shackles and swivels, master links, hooks and eye bolts among lifting tackle. Regulation 18(10) requires sound material, enough strength, freedom from defects and a generally accepted technical standard, and no factor of safety is set for them.[1]
Can tackle marked with a working load limit be used?
Yes. The department's guidelines note that lifting tackle marked with a Working Load Limit is also acceptable as complying with regulation 18(10). The correction notice GN R. 913 gives Working Load Limit a meaning corresponding to safe working load.[3][2]
Tell us about the lift
Sources
- Department of Labour (Government Gazette 38905), Driven Machinery Regulations, 2015 (GN R. 540), 24 June 2015.
- Department of Labour (Government Gazette 39253), Driven Machinery Regulations, 2015: correction notice (GN R. 913), 2 October 2015.
- Department of Labour (Government Gazette 40734), Guidelines for Driven Machinery Regulations, 2015 (GN R. 288, Rev 0), 31 March 2017.
- Health and Safety Executive (UK), Safe use of lifting equipment: Lifting Operations and Lifting Equipment Regulations 1998, Approved Code of Practice and guidance (L113), Second edition 2014, with amendments 2018.
- Department of Labour (Government Gazette 38905), Incorporation of safety standards into the Driven Machinery Regulations, 2015 (GN R. 542), 24 June 2015.
- Department of Labour (Government Gazette 41622), Incorporation of safety standards into the Driven Machinery Regulations, 2015: amendment removing SANS 2972 (GN R. 483), 11 May 2018.