Skip to content

Jackhammer hire for breaking concrete and asphalt

Describe what must be broken, how thick it is and where the power will come from. Headcore puts your request in front of companies that hire out breakers and serve your area, and each decides whether to respond.

Free to post. Nothing reaches suppliers until you review and post it.

  • Reaches matching companies within minutes
  • Anonymous to suppliers until you choose to reveal
  • You choose who to talk to
What details help?

All optional. Mention what you know.

  • The machine. TLB, excavator, grader, roller or tipper, and roughly what size, if you know.
  • With or without an operator. Whether you need an operator, fuel and transport to site, or the machine on its own.
  • How long. Days or weeks, and the date you need it on site.
  • The site. The town, access for a truck or lowbed, and the ground conditions.
See an example request

Illustrative, not a real request.

We need a jackhammer for three days to break out a concrete slab and a short length of kerb at a workshop entrance.
  • Slab about 150 mm thick, mesh reinforced, roughly 20 square metres
  • Mains power on site, no compressor, Pietermaritzburg, KwaZulu-Natal

How Headcore helps with jackhammer hire

Keep your usual hire company in the mix. Headcore helps you find additional companies that can do this work.

  1. 01

    Describe the breaking

    Start in your own words: what is being broken, how thick it is, where the power comes from and how long you need the breaker. You review the request before anything is posted.

  2. 02

    Reach breaker hire companies

    Companies that hire out jackhammers and breakers and serve your area see the request. Each decides for itself whether to respond.

  3. 03

    Choose who to speak with

    Compare how they would approach it, reveal your company only to the ones you choose, and deal with them directly.

Before you hire a jackhammer

  • What is being broken

    Say whether it is concrete, asphalt or brick, how thick it is and whether it has reinforcing, so the hire company can choose the weight.

  • Where the power comes from

    A jackhammer can run on mains power, a compressor, petrol or a hydraulic supply. Say what the site has, because each needs something different to arrive with the breaker.

  • How many hours a day

    The hand-arm vibration limits and the 85 dBA noise limit are 8-hour values, so say how many hours a day the breaker will run and how many people will share the work.

  • Chisels and spares

    Say whether chisels are in the rate, with spares, and what happens when one wears out or breaks.

  • Dust and protective gear

    Breaking concrete can make fine silica dust and a lot of noise. Say who supplies hearing protection and dust control, and whether the work is indoors.

In short

Jackhammer hire starts with the weight and the power. In makers' pages, hand-held tools run from a 5.6 kg electric demolition hammer to 43 kg air breakers, on mains power, a compressor, petrol or hydraulic oil. Say the material, its thickness and the power on site. Vibration and the 85 dBA noise limit are 8-hour values, so hours matter.

Which size and type of jackhammer do I need?

Hand-held breakers split by what drives them and by weight. The rows are individual models and ranges from makers' pages for New Zealand, the United Kingdom, South Africa, the United Arab Emirates and Türkiye, read in November 2026, so they show the spread rather than a standard size class. The air figures are the maker's air consumption per breaker; how to size a compressor's free air delivery for them is in the compressor hire article.[1][2][3][4][6][5]

Which size and type of jackhammer do I need?
Type and weightWhat drives itWhat the maker says it is for
Light electric demolition hammer, 5.6 kg230 V, 1,110 W continuous input, 11.6 J of impact energy, SDS-Max shank, a 5.0 m cable.The maker's page names no use.
Medium electric demolition hammer, 12.3 kg230 V, 1,510 W continuous input, 19.9 J of impact energy, SDS-Max shank, a 5.0 m cable.The maker's page names no use; its accessory list names cold chisels and other tools.
Heavy electric, 27.1 kg85 J of single impact energy and a HEX 28 chuck; the page gives no mains rating.Heavy-duty concrete demolition, asphalt cutting, earthwork and driving ground rods; reinforced concrete slabs and foundations; digging and trenching in rocky or hard clay ground.
Light air breaker, 19 to 23 kgCompressed air, 25 to 26 l/s, 1,140 to 1,530 blows a minute, hex shanks of 22 by 82.5 to 28 by 160 mm.Light breakers for service jobs and general demolition.
Medium air breaker, 25.5 to 37 kgCompressed air, 30 to 36 l/s, 1,200 to 1,500 blows a minute, hex shanks of 25 by 108 to 32 by 160 mm.Medium breakers for service jobs and general demolition.
Heavy air breaker, 37 to 43 kgCompressed air, 35 to 40 l/s, 1,110 to 1,260 blows a minute, hex shanks of 28 by 160 and 32 by 160 mm.Heavy-duty demolition breakers for medium and hard materials.
Petrol breaker, 22.7 to 23.8 kgPetrol engine of 1.6 kW effective power, 55 J of single impact energy, 1,300 blows a minute.The maker's data page names no use.
Hydraulic breaker, 28 kg with hosesHydraulic oil at 20 to 30 l/min and 105 to 125 bar, 1,500 to 2,100 blows a minute, hex shanks of 25 by 108 to 32 by 160 mm.A multi-purpose breaker in the medium weight class, commonly used with 5 inch asphalt chisels for road building and maintenance; also brickwork, frozen soil and concrete.

What should a jackhammer hire request include?

Usually, the power decides what can be sent, so give it first. An air breaker runs on a compressor, a hydraulic breaker on a hydraulic power pack or an excavator's hydraulics, a petrol breaker on its own engine and an electric one on mains power, so say what the site has and what the hire company must bring. A response that leaves the supply out cannot be compared with one that includes it.[4][5][6][2]

For an air breaker, say how many will run at the same time: the table gives one maker's air use per breaker, and the compressor hire article explains how to size a compressor's free air delivery for it. For an electric breaker, one maker lists 230 V models at 1,110 W and 1,510 W with a 5.0 m cable, so say where the socket is and how far the work is from it. For a hydraulic breaker, one maker lists 20 to 30 l/min at 105 to 125 bar, so ask what supplies it.[1][2][5]

Say the chisel as well. One maker's accessory list for an electric demolition hammer names cold chisels and other tools, and another maker's air breakers take hex shanks from 22 by 82.5 mm to 32 by 160 mm, so a chisel made for one shank size does not fit a breaker with another. Ask which chisels arrive with the breaker and whether spares are in the rate.[2][4]

The makers' pages used here each give a vibration figure: one lists 8 m/s² for a 12.3 kg electric demolition hammer without saying how it was measured, another a triaxial 6.3 m/s² for chiselling in concrete for a 27.1 kg electric jackhammer, and a third 4.6 m/s² on three axes (ISO 28927-10) for a hydraulic breaker. The Physical Agents Regulations set the hand-arm limits as 8-hour values and require exposure monitoring to be normalised to an 8-hour time-weighted average (regulation 13(4)), so a maker's figure is not the operator's exposure. Ask the hire company for the vibration data of the model it sends, and plan the hours with whoever runs the site.[2][3][5][7]

  • what is being broken, how thick it is and whether it is reinforced;
  • the power on site: a socket, a compressor, petrol or hydraulic oil;[4][5][2]
  • the hours a day and the number of people who will use it;[7]
  • chisels and spares, and who brings the hose, the cable or the compressor;[2][4]
  • the machine's noise and vibration data, and who supplies hearing protection and dust control.[8][7][10]

What vibration and noise duties come with a hired jackhammer?

The Physical Agents Regulations, 2024 require the employer to eliminate hand-arm vibration at the source where reasonably practicable (regulation 13(1)). Table 1 sets the action level for hand-arm vibration at 2,5 m/s² and the exposure limit at 5 m/s², both over 8 hours. Where elimination is not reasonably practicable and exposure is at or above the exposure limit, regulation 13(3) requires, as a minimum, measures that include alternative working methods, plant designed to produce the least possible vibration, maintenance programmes and a limit on the duration and magnitude of exposure.[7]

The Noise Exposure Regulations, 2024 define the noise-rating limit as an 8-hour rating level of 85 dBA for continuous noise, or a peak level of 137 dBC for impulse noise. Regulation 6(1)(d) requires any supplier of plant or machinery to give the employer or user its noise and vibration emission data, so ask for it before the breaker arrives. Where exposure cannot be eliminated or controlled, regulation 12 requires the employer to provide suitable hearing protective devices.[8]

The Construction Regulations, 2014 define demolition work as a method to dismantle, wreck, break, pull down or knock down a structure or part of one by manual labour, machinery or explosives (regulation 1). On a construction site, regulation 14(1) requires the employer who performs the construction work to appoint a competent person in writing to supervise and control all demolition work on site, and where a structure is being demolished, regulation 14(4) requires all reasonably practicable precautions against it collapsing when reinforced concrete is cut. The regulations do not name breakers or jackhammers, so ask whoever runs the site whether the breaking is demolition work under that definition.[9]

Both the Physical Agents and the Noise Exposure notices were published in Government Gazette 52226 on 6 March 2025.[7][8]

Does breaking concrete make dust, and what limit applies?

Yes. The United Kingdom's Health and Safety Executive says cutting or breaking up concrete can produce airborne respirable crystalline silica, which causes silicosis, a serious lung disease. That is the UK regulator's guidance, not South African law.[11]

South Africa's Regulations for Hazardous Chemical Agents, 2021 list quartz, a form of crystalline silica, in Table 2 of Annexure 2, the table of maximum limits, at 0,1 mg/m³ for the respirable fraction, with a carcinogen notation. Regulation 10(1) requires the employer to prevent exposure or, where that is not reasonably practicable, to control it adequately.[10]

Where reasonably practicable, regulation 10(2) lists among the ways of control local extraction ventilation on tools and equipment and the use of wet methods. Say in the request whether the breaker will be used indoors or in a confined space, and whether the hire company can supply dust control with it.[10]

Sources

  1. Makita New Zealand, HM0871C Demolition Hammer SDS-Max (product page), Undated product page, read 19 November 2026.
  2. Makita New Zealand, HM1214C 18mm SDS-Max Demolition Hammer (product page), Undated product page, read 19 November 2026.
  3. Hilti (United Kingdom), TE 3000-AVR TE-H heavy-duty electric jackhammer (product page), Undated product page, read 19 November 2026.
  4. Atlas Copco South Africa, TEX pneumatic breakers: technical data, Undated product page, read 19 November 2026.
  5. Atlas Copco (United Arab Emirates), LH 230 E vibro-reduced hydraulic breaker (product page), Undated product page, read 19 November 2026.
  6. Wacker Neuson (Türkiye, English page), BH55 Gasoline Breaker: technical data, Undated product page, read 19 November 2026.
  7. Department of Employment and Labour (Government Gazette 52226), Physical Agents Regulations, 2024 (Notice 5952), 6 March 2025.
  8. Department of Employment and Labour (Government Gazette 52226), Noise Exposure Regulations, 2024 (Notice 5953), 6 March 2025.
  9. Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R. 84), 7 February 2014.
  10. Department of Employment and Labour (Government Gazette 44348), Regulations for Hazardous Chemical Agents, 2021 (GN R. 280), 29 March 2021 (Annexure 3 paragraphs replaced by GN R. 283 of 31 March 2021; Annexure 2 and regulation 10 unchanged).
  11. Health and Safety Executive (UK), Concrete, Last updated 2 November 2021.

Last checked: 19 November 2026

How Headcore works

  • Posting a request is free.
  • Your request goes to companies that do the kind of work you describe.
  • A supplier answers with a response that says how they would do the job. You read the responses and decide who to talk to.

See how it works

Under two minutes.

Ready to get started?

Start your request

Questions buyers ask

What does it cost to post a request?

Posting a request is free. A supplier pays one token when it decides your request is worth answering. What you agree about the work is between you and the supplier.

Who sees my request?

Companies that do this specific work, within reach of your site. They see the job. Whether they also see your company name is your choice: you can stay anonymous until you pick who to talk to.

What if nobody responds?

Your request reaches companies that do this work within minutes. Each decides for itself whether to respond, so we cannot promise responses. If the work cannot wait, contact your usual suppliers as well.

Does Headcore hire out equipment?

No. Headcore is a matching system: it puts your request in front of companies that do this work, and you deal with the supplier directly. Keep your usual suppliers; use Headcore when they cannot help, or when the job is outside what they do.

Does a jackhammer need a compressor?

Only an air breaker does. Electric breakers run on mains power, petrol breakers on their own engine and hydraulic breakers on a hydraulic power pack or an excavator's hydraulics. How much air a breaker uses, and how to size the compressor for it, is in the compressor hire article.

How heavy is a jackhammer?

In the makers' pages used here, from 5.6 kg for a light electric demolition hammer to 43 kg for a heavy air breaker. An electric jackhammer weighs 27.1 kg, a petrol breaker 22.7 to 23.8 kg depending on its tool holder, and a hydraulic breaker 28 kg with its hoses. Say what you are breaking, and let the hire company choose the weight.

What noise and vibration information should come with a hired jackhammer?

The Noise Exposure Regulations, 2024 require a supplier of plant or machinery to give the employer or user its noise and vibration emission data (regulation 6(1)(d)). Ask for it with the response, so the person running the site can judge the operator's exposure against the limits.

Start with what you know.

A sentence or two is enough. Nothing reaches suppliers until you review and post it.

Start your request