Excavator hire for trenching, digging and loading
Describe the digging, the ground and where the machine must go. Headcore puts your request in front of companies that hire out excavators and serve your area, and each decides whether to respond.
Free to post. Nothing reaches suppliers until you review and post it.
- Reaches matching companies within minutes
- Anonymous to suppliers until you choose to reveal
- You choose who to talk to
What details help?
All optional. Mention what you know.
- The machine. TLB, excavator, grader, roller or tipper, and roughly what size, if you know.
- With or without an operator. Whether you need an operator, fuel and transport to site, or the machine on its own.
- How long. Days or weeks, and the date you need it on site.
- The site. The town, access for a truck or lowbed, and the ground conditions.
See an example request
Illustrative, not a real request.
We need a 20 tonne excavator with an operator for two weeks to dig and load out a drainage trench.
- Trench about 3 m deep, clay ground, access through a 3.5 m gate
- Site near Paarl, Western Cape, wet rate with diesel included
How Headcore helps with excavator hire
Keep your usual hire company in the mix. Headcore helps you find additional companies that can do this work.
- 01
Describe the digging
Start in your own words: what must be dug, how deep, in what ground and for how long. You review the request before anything is posted.
- 02
Reach excavator companies
Companies that hire out excavators and serve your area see the request. Each decides for itself whether to respond.
- 03
Choose who to speak with
Compare how they would approach it, reveal your company only to the ones you choose, and deal with them directly.
Before you hire an excavator
Wet or dry
Say whether the rate must include the operator and the diesel. A response that does not say which it is cannot be compared with one that does.
The work and the ground
Give the deepest cut, the material and whether the ground is soft or wet. They decide the size, the arm and the track shoes.
Hours
Ask for the minimum hours a day, what counts as standby and how hours are recorded. The district request on this page writes down all three.
Getting it to site
A large machine arrives on a lowbed trailer and is usually priced as its own line. Say how the machine will reach the site and the narrowest gate on the way in.
The operator
On a construction site the operator needs proof of competency, written authorisation and a medical certificate of fitness. Say whether you supply the operator or the hire company does.
In short
Excavator hire is quoted wet, with the operator, fuel and maintenance in the hourly rate, or dry. The buyers here set a minimum day of 8 hours and pay delivery as its own line. A 20 tonne machine is wider than the road rules let a load on a lowbed be, so the move needs an abnormal load permit.
What sizes of excavator do public buyers ask to hire?
One district municipality's plant hire request T 2025/015, which closed on 19 March 2025, listed excavators with an operator in three groups. Each class is split by year of manufacture, and the schedule asks for the boom reach, the fuel use per hour, the establishment charge per kilometre, the wet rate and the standby rate. A second municipality asked for a single 20 tonne machine. What the machine is, and its own classes by weight, are on the excavator page.[1][2]
| What was hired | How it was specified | What the document adds |
|---|---|---|
| Mini excavators, crawler tracks, with operator | Three classes: 0 to 5 tons, 5 to 10 tons and 10 to 15 tons. | Priced on the same columns as the larger machines: wet rate, standby rate and an establishment rate per kilometre. |
| Crawler excavators, hydraulic backactor, with operator | Five classes: 20 ton (100 to 130 kW), 22 to 24 ton (100 to 150 kW), 27 ton (120 to 200 kW), 30 ton (130 to 240 kW) and 30 to 40 ton (160 to 240 kW). | Each class is split into four year-of-manufacture bands, from 2010 to 2015 up to 2020 and newer. |
| The same five classes, with packer or hammer action | Listed again as their own category, with the same weights and engine sizes. | A machine with hammer action is priced on its own schedule, apart from the bucket machine, so name any attachment in a request. |
| One 20 ton excavator for housekeeping on a disused landfill site | A named reference model or equivalent, with a minimum year of manufacture and a minimum net power (a municipal request closing on 6 December 2023). | The documents of the machine and the operator had to be handed in with the response, or it was incomplete. The machine needed a working hour meter, read at the start and the end for claims and payments. |
Is excavator hire wet or dry, and how are the hours counted?
Usually, hire is quoted wet, with the operator and fuel in the hourly rate. The district request priced every excavator class at a wet rate and a standby rate per hour, and the request for the 20 ton machine asked for a rate that "should include all costs/wet rate (operator, fuel etc.)", with a minimum of 8 hours a day.[1][2]
The district request counts the 8-hour shift, standby and downtime the same way for every machine it hires. The article on TLB hire rates sets those rules out, with rand rates for a TLB hour from municipal tariff books.[1]
Ask each response for the same lines: the wet or dry basis, the hourly rate, the minimum hours, the standby rate, and how hours are read.
What does delivery add, and what should a request say about the site?
Usually, delivery is a line of its own, apart from the hourly rate. The 20 ton request priced transport from the depot to the site and back as one amount, and the district request paid establishment per kilometre on the one-way distance from the hire company's premises, treating the machine as unavailable, with no hire charged, while in transit.[2][1]
The district request had a separate line for a mechanical horse and lowbed trailer carrying plant of 20 to 40 tons, at a rate per ton per kilometre, with escort costs per kilometre shown separately on the price schedules and the cost of abnormal load permits shown separately on the invoice. The article on lowbed transport gives municipal tariffs for a lowbed.[1]
The road rules decide whether the machine moves as an abnormal load. The National Road Traffic Regulations, 2000 bar a goods vehicle with a gross vehicle mass of 12,000 kg or more from a public road if its overall width exceeds 2.6 metres (regulation 223(b)), or if it carries goods that project more than 1.3 metres either side of its centre-line (regulation 227(1)(a)(i)). One maker's brochure for Africa gives its 20 tonne class machine an overall width of 2,800 mm on 600 mm shoes, wider than that allows. The Western Cape government says a permit is needed to transport abnormal loads and vehicles; the article on lowbed transport covers the permit.[3][4][6][5]
Ground and attachments change the machine. Wider track shoes lower the ground pressure (the excavator page gives one 20 tonne machine's figures), and the district request hires hammer-action machines as their own category, so say in the request if the ground is soft and whether a hammer or other attachment is wanted.[6][1]
What must a hired excavator and its operator meet on a construction site?
The Construction Regulations, 2014 require that mobile plant is operated by a person who "has received appropriate training, is certified competent and in possession of proof of competency and is authorised in writing to operate" it, and who has a medical certificate of fitness issued by an occupational health practitioner in the form of Annexure 3 (Construction Regulations, 2014, regulation 23(1)(d)).[7]
Regulation 23 also sets duties for the machine itself, among them a daily inspection against a checklist with the findings recorded in a register kept in the machine, and regulation 13 puts excavation work under a competent person appointed in writing: the excavator page sets these out. This is the text now in force; the 2025 draft regulations are not final.[7]
Sources
- Cape Winelands District Municipality, Tender T 2025/015: the hiring of mechanical and construction plant equipment for the period ending 30 June 2028 (specification and pricing schedules), Closing date 19 March 2025.
- Bergrivier Municipality, Quotation 8/2/58-2023 (MN234-2023): hiring of a 20 ton excavator for housekeeping in Redelinghuys, Closing 6 December 2023.
- Department of Transport (Government Gazette 20963), National Road Traffic Regulations, 2000 (GN R. 225): regulation 223, 17 March 2000.
- Department of Transport (Government Gazette 32258), Amendment of the National Road Traffic Regulations (GN R. 589), regulation 17: substitution of regulation 227, 27 May 2009.
- Western Cape Government, Mobility Department, Permits for abnormal loads and vehicles, Undated web page, read 19 November 2026.
- Komatsu Ltd (brochure for Africa), PC210-10M0 and PC210LC-10M0 hydraulic excavator brochure, March 2022 (EENSB12400 03/2022).
- Department of Labour (Government Gazette 37305), Construction Regulations, 2014 (GN R.84): regulations 13 and 23, 7 February 2014.
Last checked: 19 November 2026
How Headcore works
- Posting a request is free.
- Your request goes to companies that do the kind of work you describe.
- A supplier answers with a response that says how they would do the job. You read the responses and decide who to talk to.
Questions buyers ask
What does it cost to post a request?
Posting a request is free. A supplier pays one token when it decides your request is worth answering. What you agree about the work is between you and the supplier.
Who sees my request?
Companies that do this specific work, within reach of your site. They see the job. Whether they also see your company name is your choice: you can stay anonymous until you pick who to talk to.
What if nobody responds?
Your request reaches companies that do this work within minutes. Each decides for itself whether to respond, so we cannot promise responses. If the work cannot wait, contact your usual suppliers as well.
Does Headcore hire out equipment?
No. Headcore is a matching system: it puts your request in front of companies that do this work, and you deal with the supplier directly. Keep your usual suppliers; use Headcore when they cannot help, or when the job is outside what they do.
What is the difference between wet and dry excavator hire?
In the district request used here, the wet rate is the dry rate plus a diesel rate per hour, and it covers fuel, operator, plant and maintenance in one hourly rate. Say in the request whether you want the operator and the diesel in the rate, and ask each response to state what its rate covers.
Is there a minimum number of hours for hiring an excavator?
The two public documents used here set one: a district request in 2025 counted a minimum of 8 hours a day, and a municipal request in 2023 for a 20 ton machine did the same. The district request priced standby apart, so ask each response for its minimum and its standby rate.
Does a hired excavator come with an operator?
Often, in the documents used here: the district request lists its excavators with an operator, and the 20 ton request asked for the operator in the wet rate. On a construction site the operator needs proof of competency, written authorisation and a medical certificate of fitness, so ask for the papers.
Start with what you know.
A sentence or two is enough. Nothing reaches suppliers until you review and post it.
Start your request